Analytical and Experimental Studies of the Debonding of Stitched and Unstitched Composite Joints
Authors:
- I. S. RajuIRI. S. Raju
- 1 December 2002
- journal article
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 36 (23) , 2599-2622
Abstract
The effect of stitches on the failure of a single lap joint configuration was determined in a combined experimental and finite element study. The experimental program was conducted to determine debond growth under static monotonic loading. The stitches were shown to delay the initiation of the debond and provide load transfer after total debonding of the lap joint. The experimentally determined debond length versus applied load was used as an input parameter in the finite element analysis of both stitched and unstitched configurations. The strain energy release rates at the debond front were calculated using plate elements. Discrete nonlinear spring elements were used to model the stitches and multipoint constraints were used to model the contact problem. Models of the unstitched configuration showed significant values of mode I and II strain energy release rates across the width of the joint and showed that mode III is zero at the centerline but increases near the free edge. Models of the stitched configuration showed that the stitches were effective in reducing the mode I component to zero, but had less effect on modes II and III.Keywords
This publication has 24 references indexed in Scilit:
- Effective Stitch Stiffness in Delaminated CompositesJournal of Reinforced Plastics and Composites, 2000
- Composite skin-stiffener debond analyses using fracture mechanics approach with shell elementsComposites Engineering, 1995
- Calculation of strain-energy release rates with higher order and singular finite elementsEngineering Fracture Mechanics, 1987
- Mechanical properties for durability predictions of FRP bonded jointComposite Structures, 1986
- The behaviour of single-lap bolted joints in CFRP laminatesComposite Structures, 1986
- Combined bearing and bypass loading on a graphite/epoxy laminateComposite Structures, 1986
- The effect of stacking sequence on the bearing strengths of quasi-isotropic composite laminatesComposite Structures, 1986
- Adhesive Bond Stresses and Strains at Discontinuities and Cracks in Bonded StructuresJournal of Engineering Materials and Technology, 1978
- A finite element calculation of stress intensity factors by a modified crack closure integralEngineering Fracture Mechanics, 1977
- Stress Analysis for Bonded LayersJournal of Applied Mechanics, 1974