Friction and wear characteristics of ceramic nanocomposite coatings: Titanium carbide/amorphous hydrocarbon
Authors:
- 10 July 2001
- journal article
- conference paper
- Published by AIP Publishing in Applied Physics Letters
- Vol. 79 (3) , 329-331
Abstract
Friction and wear characteristics of titanium-containing amorphous hydrocarbon (Ti–C:H) coatings were measured during unlubricated sliding against WC–Co. These Ti–C:H coatings consist of nanocrystalline TiC clusters embedded in an amorphous hydrocarbon matrix, i.e., they are nanocomposites. The elastic modulus and hardness of the coatings exhibit smooth variations with increasing Ti composition. In contrast, a relatively abrupt transition occurs in the friction coefficient and wear rate of the coatings over a relatively narrow (20–30 at. %) Ti composition range. Our results reveal bimodal friction and wear behaviors for the nanocomposites, like at Ti compositions below 20%, and TiC like at Ti compositions above 30%. The two different wear mechanisms that operate as the volume fraction of nanocrystalline TiC clusters changes are discussed.
Keywords
This publication has 10 references indexed in Scilit:
- Mechanical properties and microstructure of TiC/amorphous hydrocarbon nanocomposite coatingsThin Solid Films, 2000
- Ti atomic bonding environment in Ti-containing hydrocarbon coatingsJournal of Applied Physics, 2000
- Inductively coupled plasma assisted deposition and mechanical properties of metal-free and Ti-containing hydrocarbon coatingsJournal of Applied Physics, 2000
- Temperature dependence of inductively coupled plasma assisted growth of TiN thin filmsSurface and Coatings Technology, 1999
- Mechanical properties of Ti-containing and W-containing diamond-like carbon coatingsJournal of Applied Physics, 1998
- Superhard nanocrystalline composite materials: The TiN/Si3N4 systemApplied Physics Letters, 1995
- Above room temperature near ultraviolet lasing from an optically pumped GaN film grown on sapphireApplied Physics Letters, 1995
- Rolling-contact-fatigue wear characteristics of diamond-like hydrocarbon coatings on steelsWear, 1993
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsJournal of Materials Research, 1992
- A Rolling Contact Fatigue Study of Hard Carbon Coated M-50 SteelJournal of Tribology, 1992