Magnetohydrodynamic pressure drop and flow balancing of liquid metal flow in a prototypic fusion blanket manifold
Authors:
- 1 May 2018
- journal article
- conference paper
- Published by AIP Publishing in Physics of Fluids
- Vol. 30 (5) , 057101
Abstract
Understanding magnetohydrodynamic (MHD) phenomena associated with the flow of electrically conducting fluids in complex geometry ducts subject to a strong magnetic field is required to effectively design liquid metal (LM) blankets for fusion reactors. Particularly, accurately predicting the 3D MHD pressure drop and flow distribution is important. To investigate these topics, we simulate a LM MHD flow through an electrically non-conducting prototypic manifold for a wide range of flow and geometry parameters using a 3D MHD solver, HyPerComp incompressible MHD solver for arbitrary geometry. The reference manifold geometry consists of a rectangular feeding duct which suddenly expands such that the duct thickness in the magnetic field direction abruptly increases by a factor rexp. Downstream of the sudden expansion, the LM is distributed into several parallel channels. As a first step in qualifying the flow, a magnitude of the curl of the induced Lorentz force was used to distinguish between inviscid, irrotational core flows and boundary and internal shear layers where inertia and/or viscous forces are important. Scaling laws have been obtained which characterize the 3D MHD pressure drop and flow balancing as a function of the flow parameters and the manifold geometry. Associated Hartmann and Reynolds numbers in the computations were ∼103 and ∼101-103, respectively, while rexp was varied from 4 to 12. An accurate model for the pressure drop was developed for the first time for inertial-electromagnetic and viscous-electromagnetic regimes based on 96 computed cases. Analysis shows that flow balance can be improved by lengthening the distance between the manifold inlet and the entrances of the parallel channels by utilizing the effect of flow transitioning to a quasi-two-dimensional state in the expansion region of the manifold.Keywords
Funding Information
- U.S. Department of Energy (DE-FG02-86ER52123)
This publication has 23 references indexed in Scilit:
- MHD thermofluid issues of liquid-metal blankets: Phenomena and advancesFusion Engineering and Design, 2010
- A current density conservative scheme for incompressible MHD flows at a low magnetic Reynolds number. Part I: On a rectangular collocated grid systemJournal of Computational Physics, 2007
- A current density conservative scheme for incompressible MHD flows at a low magnetic Reynolds number. Part II: On an arbitrary collocated meshJournal of Computational Physics, 2007
- Turbulent transport of momentum and heat in magnetohydrodynamic rectangular duct flow with strong sidewall jetsJournal of Fluid Mechanics, 2000
- Mhd flow tailoring in first wall coolant channels of self-cooled blanketsFusion Engineering and Design, 1989
- Three-dimensional MHD duct flows with strong transverse magnetic fields. Part 3. Variable-area rectangular ducts with insulating wallsJournal of Fluid Mechanics, 1972
- Slow steady flows of a conducting fluid at large Hartmann numbersFluid Dynamics, 1968
- Magnetohydrodynamic flow in channels of variable cross-section with strong transverse magnetic fieldsJournal of Fluid Mechanics, 1967
- Magnetohydrodynamic flow in rectangular ductsJournal of Fluid Mechanics, 1965
- Steady motion of conducting fluids in pipes under transverse magnetic fieldsMathematical Proceedings of the Cambridge Philosophical Society, 1953