On the Convergence of Stresses in Fretting Fatigue
Open Access
Abstract
Fretting is a phenomenon that occurs at the contacts of surfaces that are subjected to oscillatory relative movement of small amplitudes. Depending on service conditions, fretting may significantly reduce the service life of a component due to fretting fatigue. In this regard, the analysis of stresses at contact is of great importance for predicting the lifetime of components. However, due to the complexity of the fretting phenomenon, analytical solutions are available for very selective situations and finite element (FE) analysis has become an attractive tool to evaluate stresses and to study fretting problems. Recent laboratory studies in fretting fatigue suggested the presence of stress singularities in the stick-slip zone. In this paper, we constructed finite element models, with different element sizes, in order to verify the existence of stress singularity under fretting conditions. Based on our results, we did not find any singularity for the considered loading conditions and coefficients of friction. Since no singularity was found, the present paper also provides some comments regarding the convergence rate. Our analyses showed that the convergence rate in stress components depends on coefficient of friction, implying that this rate also depends on the loading condition. It was also observed that errors can be relatively high for cases with a high coefficient of friction, suggesting the importance of mesh refinement in these situations. Although the accuracy of the FE analysis is very important for satisfactory predictions, most of the studies in the literature rarely provide information regarding the level of error in simulations. Thus, some recommendations of mesh sizes for those who wish to perform FE analysis of fretting problems are provided for different levels of accuracy.Keywords
Funding Information
- Fonds Wetenschappelijk Onderzoek (G018916N)
- Fachagentur Nachwachsende Rohstoffe (G018916N)
- The Slovenian Research and Innovation Agency (G018916N)
This publication has 28 references indexed in Scilit:
- Experimental and numerical study on crack initiation under fretting fatigue loadingInternational Journal of Fatigue, 2016
- Crack initiation and propagation under fretting fatigue of inconel 600 alloyJournal of Mechanical Science and Technology, 2015
- FEM modeling of crack nucleation and crack propagation fretting fatigue maps: Plasticity effectWear, 2015
- 3D two scale X-FEM crack model with interfacial frictional contact: Application to fretting fatigueTribology International, 2010
- Extended finite element method for fretting fatigue crack propagationInternational Journal of Solids and Structures, 2008
- The effect of slip regime on fretting wear-induced stress evolutionInternational Journal of Fatigue, 2004
- Theoretical analysis of fatigue cracking under dry friction for fretting loading conditionsWear, 1996
- On fretting mapsWear, 1988
- An analysis of fretting cracks—II. Unloading and reloading phasesInternational Journal of Solids and Structures, 1986
- Fundamental Investigations of Fretting Fatigue : (Part 5, The Effect of Relative Slip Amplitude)Bulletin of JSME, 1969