Relationship between morphology and rheology of PA/PE/Clay blend nanocomposites. I. PA matrix
- 31 January 2012
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 125 (S1) , E503-E514
Abstract
Morphology and linear viscoelastic properties of PA/PE/Clay blend nanocomposites with and without compatibilizer (PE‐g‐MA) with PA as a matrix phase were studied. Using rheological and XRD analyses, it was shown that the clay exhibited higher dispersion in PA/PE blend than that in pure PA. It was attributed to the detachment of intercalated clay layers in PA matrix due to the stress transfer of PE particles and deformation flow field created between PE particles, leading to formation of stronger network. The presence of PE‐g‐MA further enhanced the clay dispersion in the blend. While the results of XRD were not able to accurately assess the morphology, using rheological analysis it was predicted that if the clay is first compounded with dispersed PE phase (PE+PE‐g‐MA), the clay could not leave the PE phase but PA diffuses to the composite droplets of (PE+PE‐g‐MA)/Clay to form phase within phase within phase morphology. SEM and TEM analyses confirmed the reliability of the prediction. It was demonstrated that the rheological studies has a reliable sensitivity to the clay dispersion, its localization, and phase morphology of blend nanocomposites. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012Keywords
This publication has 44 references indexed in Scilit:
- Rheology, morphology, and thermal behavior of HDPE/clay nanocompositesPolymer Composites, 2010
- Mechanical and gas permeation properties of compatibilized polypropylene–layered silicate nanocompositesJournal of Applied Polymer Science, 2007
- Poly(propylene)‐Layered Silicate Nanocomposites: Gas Permeation Properties and Clay ExfoliationMacromolecular Chemistry and Physics, 2007
- Influence of melt‐blending conditions on structural, rheological, and interfacial properties of polyamide‐12 layered silicate nanocompositesPolymer Engineering & Science, 2006
- The linear viscoelastic properties of copolypropylene-clay nanocompositesJournal of Applied Polymer Science, 2005
- Melt processing of PA‐66/clay, HDPE/clay and HDPE/PA‐66/clay nanocompositesPolymer Engineering & Science, 2004
- Rheological behavior of new melt compounded copolyamide nanocompositesPolymer, 2004
- Rheological properties of diblock copolymer/layered‐silicate nanocompositesJournal of Polymer Science Part B: Polymer Physics, 2002
- Novel filled polymer composites prepared from in situ polymerization via a colloidal approach: II. Blends of kaolin/Nylon-6 in situ composites with conventional nylon-6 and -66Journal of Polymer Science Part B: Polymer Physics, 1996
- The permeation of water vapor through polyethyleneJournal of Polymer Science, 1958