Stiffness optimization for two‐armed robotic sculpting
Authors:
- 11 January 2008
- journal article
- Published by Emerald Publishing in Industrial Robot: the international journal of robotics research and application
- Vol. 35 (1) , 46-57
Abstract
Purpose – Recent research has considered robotic machining as a dextrous alternative to traditional CNC machine tools for complex sculptured surfaces. One challenge in using robotic machining is that the stiffness is lower than traditional machine tools, due to the cantilever design of the links and low-torsional stiffness of the actuators. This paper seeks to examine this limitation, using optimization algorithms to determine the best trajectories for the manipulators such that the stiffness is maximized. Design/methodology/approach – The issue of low stiffness is addressed with an integrated off-line planner and real-time re-planner. The available manipulator stiffness is maximized during off-line planning through a trajectory resolution method that exploits the nullspace of the robot machining system. In response to unmodeled disturbances, a real-time trajectory re-planner utilizes a time-scaling method to reduce the tool speed, thereby reducing the demand on the actuator torques, increasing the robot's dynamic stiffness capabilities. During real-time re-planning, priorities are assigned to conflicting performance criteria such as stiffness, collision avoidance, and joint limits. Findings – The algorithms developed were able to generate trajectories with stiffer configurations, which resulted in a reduction in the actuator torques. The real-time re-planner successfully allowed the process plan to continue when disturbances were encountered. Research limitations/implications – Simulations are presented to demonstrate the effectiveness of the approach. Practical implications – Addressing the limitation of stiffness in serial-link manipulators will enable robots to become more suitable for machining tasks. The real-time re-planning approach will allow robots to become more autonomous during the execution of a given task. Originality/value – An integrated off-line and real-time planning approach has been applied to robotic machining.Keywords
This publication has 29 references indexed in Scilit:
- A multi-arm robotic system for optimal sculptingRobotics and Computer-Integrated Manufacturing, 2008
- Real‐time trajectory resolution for a two‐manipulator machining systemJournal of Robotic Systems, 2006
- Chatter analysis of robotic machining processJournal of Materials Processing Technology, 2006
- Rapid and flexible prototyping through a dual-robot workcellRobotics and Computer-Integrated Manufacturing, 2003
- Analysis of multi-axis milling in an anthropomorphic robot, using the design of experiments methodologyJournal of Materials Processing Technology, 2003
- Manufacturing Automation: Metal Cutting Mechanics, Machine Tool Vibrations, and CNC DesignApplied Mechanics Reviews, 2001
- Kinematic control of redundant robots and the motion optimizability measureIEEE Transactions on Systems, Man, and Cybernetics, Part B (Cybernetics), 2001
- Trajectory planning for automated robotic deburring on an unknown contourInternational Journal of Machine Tools and Manufacture, 2000
- Direct adaptive control of end milling processInternational Journal of Machine Tools and Manufacture, 1994
- Optimal motion coordination of two robots—a polynomial parameterization approach to trajectory resolutionJournal of Robotic Systems, 1994