Characterization of Mode I and Mode II Interlaminar Fracture Toughness in CNT-Enhanced CFRP under Various Temperature and Loading Rates
Open Access
- 25 May 2023
- journal article
- research article
- Published by MDPI AG in Nanomaterials
- Vol. 13 (11) , 1729
Abstract
This study investigates the influence of temperature and loading rate on the Mode I and Mode II interlaminar fracture behavior of carbon-nanotubes-enhanced carbon-fiber-reinforced polymer (CNT-CFRP). CNT-induced toughening of the epoxy matrix is characterized by producing CFRP with varying loading of CNT areal density. CNT-CFRP samples were subjected to varying loading rates and testing temperatures. Fracture surfaces of CNT-CFRP were analyzed using scanning electron microscopy (SEM) imaging. Mode I and Mode II interlaminar fracture toughness increased with increasing amount of CNT to an optimum value of 1 g/m2, then decreased at higher CNT amounts. Moreover, it was found that CNT-CFRP fracture toughness increased linearly with the loading rate in Mode I and Mode II. On the other hand, different responses to changing temperature were observed; Mode I fracture toughness increased when elevating the temperature, while Mode II fracture toughness increased with increasing up to room temperature and decreased at higher temperatures.Keywords
Funding Information
- Natural Sciences and Engineering Research Council of Canada (NSERC) CREATE
- York University Lassonde School of Engineering
This publication has 37 references indexed in Scilit:
- Influence of the Hybrid Combination of Multiwalled Carbon Nanotubes and Graphene Oxide on Interlaminar Mechanical Properties of Carbon Fiber/Epoxy LaminatesApplied Composite Materials, 2017
- Characterization of carbon nanotube enhanced interlaminar fracture toughness of woven carbon fiber reinforced polymer compositesInternational Journal of Mechanical Sciences, 2017
- Enhancement of interlaminar fracture toughness of carbon fiber–epoxy composites using polyamide‐6,6 electrospun nanofibersJournal of Applied Polymer Science, 2017
- Energy‐Dissipative Matrices Enable Synergistic Toughening in Fiber Reinforced Soft CompositesAdvanced Functional Materials, 2017
- Mechanical performance of CNT-filled glass fiber/epoxy composite in in-situ elevated temperature environments emphasizing the role of CNT contentComposites Part A: Applied Science and Manufacturing, 2016
- Mode I and Mode II interlaminar fracture toughness of CFRP/magnesium alloys hybrid laminatesComposite Interfaces, 2016
- Effect of CNT functionalization on crack resistance of a carbon/epoxy composite at a cryogenic temperatureComposites Part A: Applied Science and Manufacturing, 2012
- The reduction of carbon nanotube (CNT) length during the manufacture of CNT/polymer composites and a method to simultaneously determine the resulting CNT and interfacial strengthsCarbon, 2009
- Mechanical Reinforcement of Polymers Using Carbon NanotubesAdvanced Materials, 2006
- Advances in the science and technology of carbon nanotubes and their composites: a reviewComposites Science and Technology, 2001