Fast determination of chromium in human serum by electrothermal atomic absorption spectrometry
Authors:
- 15 August 2002
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Journal of Analytical Atomic Spectrometry
- Vol. 17 (10) , 1335-1338
Abstract
In this work, a group of chemical modifiers used in solution or as permanent modifiers were studied for the determination of chromium in human serum by ETAAS. The serum samples were diluted in the autosampler in the ratio 1 + 4 with 1% v/v nitric acid containing 0.02% v/v of cetyltrimethylammonium choride (CTAC). Formation of crusts in all the modifiers was prevented by addition of an optimized concentration of CTAC. Pyrolysis and atomization temperature curves were constructed for each modifier in the serum sample. For all the studied permanent modifiers (Ir, Ru, Zr and a mixture of Ir plus Rh) a plateau was obtained rather than peak formation, which, even for a 10 s atomization, did not return to the base line. With Pd + Mg, the peak was irregular and noisy and had a sensitivity about 4 times lower than that without modifier. The best results were obtained without a modifier, and with pyrolysis and atomization temperatures of 1000 and 2200 °C, respectively (characteristic mass of 0.6 ± 0.01 pg, recommended 8.0 pg without modifier for aqueous solutions). Calibration curves were similar using standard additions and aqueous solutions (with coefficients of 0.030 and 0.031, respectively). Three replicates of spiked serum samples were analyzed on three different days and the results were always close to 100%. The limit of detection (n = 10, k = 3) was 0.04 µg L−1. It was possible to run more than 300 cycles of atomization with a tube, without alteration in the signal and without the formation of crusts.Keywords
This publication has 23 references indexed in Scilit:
- The use of a W-Rh permanent modifier for direct determination of bismuth in urine and whole blood by electrothermal atomic absorption spectrometryJournal of Analytical Atomic Spectrometry, 2001
- Determination of chromium in urine by electrothermal atomic absorption spectrometry using different chemical modifiersJournal of Analytical Atomic Spectrometry, 1999
- Determination of Ag, Pb and Sn in aqua regia extracts from sediments by electrothermal atomic absorption spectrometry using Ru as a permanent modifierJournal of Analytical Atomic Spectrometry, 1999
- Tungsten-rhodium permanent chemical modifier for lead determination in digests of biological materials and sediments by electrothermal atomic absorption spectrometryJournal of Analytical Atomic Spectrometry, 1999
- Evaluation of tungsten–rhodium coating on an integrated platform as a permanent chemical modifier for cadmium, lead, and selenium determination by electrothermal atomic absorption spectrometrySpectrochimica Acta Part B: Atomic Spectroscopy, 1998
- Determination of metals in biofluids and tissues: sample preparation methods for atomic spectroscopic techniquesSpectrochimica Acta Part B: Atomic Spectroscopy, 1996
- Permanent iridium modifier for electrothermal atomic absorption spectrometryJournal of Analytical Atomic Spectrometry, 1995
- Palladium nitrate–magnesium nitrate modifier for electrothermal atomic absorption spectrometry. Part 5. Performance for the determination of 21 elementsJournal of Analytical Atomic Spectrometry, 1992
- Palladium nitrate-magnesium nitrate modifier for graphite furnace atomic absorption spectrometry. Part 1. Determination of arsenic, antimony, selenium and thallium in airborne particulate matterJournal of Analytical Atomic Spectrometry, 1988
- Palladium and magnesium nitrates, a more universal modifier for graphite furnace atomic absorption spectrometrySpectrochimica Acta Part B: Atomic Spectroscopy, 1986