Microstructural Features in Multicore Cu–Nb Composites
Open Access
- 19 November 2021
- Vol. 14 (22) , 7033
Abstract
The study is devoted to heavily drawn multicore Cu–18Nb composites of cylindrical and rectangular shapes. The composites were fabricated by the melt-and-deform method, namely, 600 in situ rods of Cu–18%Nb alloy were assembled in a copper shell and cold-drawn to a diameter of 15.4 mm (e = 10.2) and then rolled into a rectangular shape the size of 3 × 5.8 mm (e = 12.5). The specimens were analyzed from the viewpoints of their microstructure, microhardness, and thermal stability. The methods of SEM, TEM, X-ray analysis, and microhardness measurements were applied. It is demonstrated that, at higher strain, the fiber texture (drawing direction), characteristic of this material, becomes sharper. The distortions of niobium lattice can be observed, namely, the interplanar distance is broadened in longitudinal direction of specimens and compacted in transverse sections. The copper matrix lattice is distorted as well, though its distortions are much less pronounced due to its recrystallization. Evolution of microstructure under annealing consists mainly in the coagulation of ribbon-like Nb filaments and in the vanishing of lattice distortions. The structural changes in Nb filaments start at 300–400 °C, then develop actively at 600 °C and cause considerable decrease of strength at 700–800 °C.
Keywords
This publication has 47 references indexed in Scilit:
- Mössbauer spectroscopy of interfaces in metalsPhysics of Metals and Metallography, 2012
- Nanostructurization of Nb by high-pressure torsion in liquid nitrogen and the thermal stability of the structure obtainedPhysics of Metals and Metallography, 2012
- Influence of cold rolling and annealing on the microstructure, mechanical properties, and electrical conductivity of an artificial microcomposite Cu-18% Nb alloyRussian Metallurgy (Metally), 2010
- Structure and Thermal Stability of Cu after Severe Plastic DeformationDefect and Diffusion Forum, 2010
- Effect of the degree of deformation on the structure and thermal stability of nanocrystalline niobium produced by high-pressure torsionPhysics of Metals and Metallography, 2007
- Stability Aspects of the High Strength High Conductivity Microcomposite Cu-Nb Wires PropertiesIEEE Transactions on Applied Superconductivity, 2006
- Transport characteristics of a CuNb/Nb3Sn superconducting coil fabricated using a react and wind methodSuperconductor Science and Technology, 2003
- Recent advances in the manufacturing of copper-base compositesJournal of Materials Processing Technology, 1996
- Modelling of the yield strength of a heavily wire drawn Cu-20%Nb composite by use of a modified linear rule of mixturesActa Metallurgica et Materialia, 1995
- A comparison of the strength and microstructure of heavily cold worked Cu-20% Nb composites formed by different melting proceduresScripta Metallurgica, 1987