Thermal Stability of Air Plasma Spray and Solution Precursor Plasma Spray Thermal Barrier Coatings
Authors:
- 26 July 2007
- journal article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 90 (10) , 3160-3166
Abstract
Yttria‐stabilized zirconia (7YSZ) thermal barrier coatings (TBCs) were produced by conventional air plasma spray (APS) and solution precursor plasma spray (SPPS) processes. Both TBCs were isothermally heat treated from 1200° to 1500°C for 100 h. Changes in the phase content, microstructure, and hardness were investigated. The nontransformable tetragonal ( t ′) phase is the predominant phase in both the as‐sprayed APS and SPPS TBCs. APS and SPPS coatings exhibit similar thermal stability behavior such as densification rate, hardness increase, and grain coarsening rate. Both the as‐received and heat‐treated APS and SPPS TBCs show a bimodal pore size distribution with nano‐ and micro‐size pores. After 1400°C/100 h heat treatment, equiaxed grains replace the columnar structure in APS TBCs and the splat structure disappears. Vertical cracks remain after the 1500°C/100 h exposure in SPPS TBCs. The monoclinic phase appears in APS TBCs after a 1400°C/100 h exposure and in SPPS coatings after a 1500°C/100 h exposure.Keywords
This publication has 23 references indexed in Scilit:
- Low-thermal-conductivity plasma-sprayed thermal barrier coatings with engineered microstructuresActa Materialia, 2006
- Phase and microstructural stability of solution precursor plasma sprayed thermal barrier coatingsMaterials Science and Engineering: A, 2004
- Identification of coating deposition mechanisms in the solution-precursor plasma-spray process using model spray experimentsMaterials Science and Engineering: A, 2003
- Mechanisms of ceramic coating deposition in solution-precursor plasma sprayJournal of Materials Research, 2002
- Thermal Barrier Coatings for Gas-Turbine Engine ApplicationsScience, 2002
- Towards durable thermal barrier coatings with novelmicrostructures deposited by solution-precursor plasma sprayActa Materialia, 2001
- Mechanisms controlling the durability of thermal barrier coatingsProgress in Materials Science, 2001
- Preparation of nanocrystalline yttria-stabilized zirconiaJournal of Materials Research, 1995
- Thermal barrier coatings: Microstructural investigation after annealingMaterials Science and Engineering: A, 1989
- Transformation Toughening in ZrO 2 ‐Containing CeramicsJournal of the American Ceramic Society, 1987