Sandwich-structured electrospun all-fluoropolymer membranes with thermal shut-down function and enhanced electrochemical performance
Authors:
Open Access
- 11 April 2022
- journal article
- research article
- Published by Taylor & Francis in Nanocomposites
- Vol. 8 (1) , 64-73
Abstract
High safety and rate capability of lithium-ion batteries (LIBs) remain challenging. In this study, sandwich-structured poly(vinylidene fluoride)/poly(vinylidene fluoride-co-hexafluoropropylene)/poly(vinylidene fluoride) (PVDF/PVDF-HFP/PVDF) membranes with thermal shut-down function were successfully prepared through electrospinning. The effects of different weight ratios of PVDF and PVDF-HFP in a composite membrane on the physical and electrochemical properties of the membrane were explored. It was found that the composite membrane with 36 wt% PVDF-HFP (P/H2/P) showed excellent electrolyte absorption (367%) and ionic conductivity (2.5 × 10−3 S/cm). Half-cell with P/H2/P as separator exhibited higher discharge capacity and better cycle performance than commercial PP membrane. More importantly, thermally stable high melting-temperature PVDF was chosen as outer layer, while low melting-temperature PVDF-HFP was used as inner layer. Self-shutdown function of this separator was achieved when heated at 140 °C, providing a safety measure for LIBs. These results indicate that PVDF/PVDF-HFP/PVDF composite membrane is a promising separator candidate in high performance LIBs applications. Graphical AbstractKeywords
Funding Information
- China Postdoctoral Science Foundation
- Foundation of Shandong province
- Taishan oversea scholar program of Shandong
This publication has 49 references indexed in Scilit:
- Electrospun Nanofibers for Sandwiched Polyimide/Poly (vinylidene fluoride)/Polyimide Separators with the Thermal Shutdown FunctionElectrochimica Acta, 2015
- Poly(vinylidene fluoride)/SiO2 composite membranes prepared by electrospinning and their excellent properties for nonwoven separators for lithium-ion batteriesJournal of Power Sources, 2014
- Fabrication and characterization of SiO2/PVDF composite nanofiber‐coated PP nonwoven separators for lithium‐ion batteriesJournal of Polymer Science Part B: Polymer Physics, 2013
- Technology and Development of Self-Reinforced Polymer Composites2011
- Reinforcement of adhesion and development of morphology at polymer–polymer interface via reactive compatibilization: A reviewPolymer Engineering & Science, 2010
- Self-reinforced poly(ethylene terephthalate) composites by hot consolidation of Bi-component PET yarnsComposites Part A: Applied Science and Manufacturing, 2010
- All-cellulose composites of regenerated cellulose fibres by surface selective dissolutionComposites Part A: Applied Science and Manufacturing, 2009
- Interfacial properties of highly oriented coextruded polypropylene tapes for the creation of recyclable all‐polypropylene compositesJournal of Applied Polymer Science, 2007
- Structure and ionic conductivity of porous polymer electrolytes based on PVDF-HFP copolymer membranesJournal of Membrane Science, 2006
- The mechanical properties of unidirectional all-polypropylene compositesComposites Part A: Applied Science and Manufacturing, 2006