Influence of Carbon Fibers and Composite Technologies on the Properties of PCM Based on Polytetrafluoroethylene
- 1 March 2021
- journal article
- research article
- Published by Pleiades Publishing Ltd in Inorganic Materials: Applied Research
- Vol. 12 (2) , 551-557
Abstract
This paper presents the results of studies on the development of various technological methods for producing composites based on polytetrafluoroethylene (PTFE) and UVIS-AK-P carbon fibers. The methods consist in the physical and ultrasonic actions on the components of polymer composites. The dependence of the physicomechanical and tribotechnical properties on the production technology of polymer composite materials (PCM) based on PTFE and carbon fibers of the UVIS-AK-P brand is investigated. Two technological methods were applied in the present work to improve the distribution of discrete carbon fibers in the polymer matrix: ultrasonic treatment of the powder composition in a dry medium and the technology of introducing the filler into the polymer matrix through a polymer concentrate with carbon fibers (CF). Herewith, the influence of the filler content in the concentrate on the properties of polymer composites is considered. To increase the adhesive interaction of the polymer with filler, the technology of joint activation of the components was used at the stage of obtaining the concentrate. Afterward, the resulting mixture was mixed with a portion of the polymer to the required concentration of the filler. The positive effect of the technology of joint mechanical activation of components on the properties of PCM based on PTFE and UVIS-AK-P carbon fibers has been established. It has been revealed that the composite with a carbon fiber content of 5 wt % obtained using combined mechanical activation of a polymer with CF at a rotational speed of planetary mill drums of 400 rpm with a weight ratio of 50% concentrate and 50% PTFE has optimal properties. The deformation and strength characteristics of this composite is at the level of the initial polymer, and the wear resistance is higher by a factor of 2020 compared with PTFE and 5 compared with a composite obtained by a simple mixed concentration with a polymer.Keywords
This publication has 9 references indexed in Scilit:
- Investigation of Influence of Methods of Mixing Components on the Properties of Composites Based on PTFE and Carbon FibersJournal of Friction and Wear, 2019
- Nanocomposites Based on Polytetrafluoroethylene and Ultrahigh Molecular Weight Polyethylene: A Brief ReviewBulletin of the Korean Chemical Society, 2014
- Plasmonic Diagnostics for Tribology: In Situ Observations Using Surface Plasmon Resonance in Combination with Surface-Enhanced Raman SpectroscopyTribology Letters, 2012
- Polytetrafluoroethylene-based polymer composites with increased wear resistance in dry frictionRussian Engineering Research, 2010
- Polytetrafluoroethylene-based polymeric composite materials intended for triboengineering applicationsRussian Journal of General Chemistry, 2009
- A new antifriction and sealing material based on radiation-modified polytetrafluoroethyleneRussian Journal of General Chemistry, 2009
- Fluoropolymer chemistry in Russia: Current situation and prospectsRussian Journal of General Chemistry, 2009
- Analysis of development of Russian fluoropolymer chemistry, production and fields of fluoropolymes application: Some aspects of the history of creating Russian fluoropolymersRussian Journal of General Chemistry, 2009
- Fluoropolymer composites of triboengineering purposesJournal of Friction and Wear, 2007