Control Method of Double Inverter Fed Wound Machine for Minimizing Copper Loss in Maximized Operating Area
Authors:
- 24 April 2017
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 64 (10) , 7700-7710
Abstract
A double inverter fed wound machine (DFWM) needs two inverters on the rotor as well as the stator side. This scheme gives more freedom to operation of an electric machine and improves the output power capability and the efficiency, but its control method becomes more complex because the number of control variables and the operating constraints increase. This paper deals with a control method of DFWM for minimizing the copper loss in maximized operating area. The possible operation area considering all constraints of currents, voltages, and flux is analyzed on the stator currents plane to maximize the operating area. For the minimum copper loss operation in the operating area, different modes are defined and the optimal currents are determined in each mode. Also, the optimal current selection algorithm is proposed to achieve the torque control using the optimal currents. The simulation and experimental results about wound machines are presented to show the feasibility of the proposed control method.Keywords
This publication has 22 references indexed in Scilit:
- Induction-Machines-Based Wind Generators With Neural Maximum Power Point Tracking and Minimum Losses TechniquesIEEE Transactions on Industrial Electronics, 2015
- Copper loss minimizing control of Doubly Fed Wound Machine2015
- Loss minimizing operation of doubly fed induction generator based wind generation systems considering reactive power provision2014
- Optimization of the control of a doubly fed induction machine2013
- Comparison study of singly-fed electric machine with doubly-fed machine for EV/HEV applications2011
- Loss-minimizing flux level control of induction motor drives2011
- Loss reduction methods for doubly-fed induction generator drives for wind turbines2006
- Sensorless Field-Oriented Control for Double-Inverter-Fed Wound-Rotor Induction Motor DriveIEEE Transactions on Industrial Electronics, 2004
- Loss-minimising control scheme for induction motorsIEE Proceedings - Electric Power Applications, 2004
- Vector-controlled double-inverter-fed wound-rotor induction motor suitable for high-power drivesIEEE Transactions on Industry Applications, 1999