Effect of the 3rd Dimension within the Representative Volume Element (RVE) on Damage Initiation and Propagation during Full-Phase Numerical Simulations of Single and Multi-Phase Steels
Open Access
Abstract
In this research, the effect of 2D and 3D Representative Volume Element (RVE) on the ductile damage behavior in single-phase (only ferrite) and dual-phase (ferrite and martensite) steels is analyzed. Physical and fitting parameters of the constitutive model for bcc-ferrite and bcc-martensite phases are adapted from the already published work. Crystal plasticity (CP) based numerical simulations without damage consideration are run and, later, ductile damage criteria for the ferrite phase is defined for all cases. The results of the non-damage (-nD-) and damage (-D-) simulations are compared to analyze the global and local differences of evolving stresses and strains. It is observed that for the same model parameters defined in all cases, damage initiation occurs at the overall higher global strain in the case of 3D compared to 2D. Based on statistical data analysis, a systematic comparison of local results is carried out to conclude that the 3D RVEs provide better quantitative and qualitative results and should be considered for such full phase simulations. Whereas 2D RVEs are simple to analyze and provide appropriate qualitative information about the damage initiation sites.Keywords
Funding Information
- Deutsche Forschungsgemeinschaft (54473466)
- Deutscher Akademischer Austauschdienst (57245990)
This publication has 37 references indexed in Scilit:
- Investigating the Effect of Cementite Particle Size and Distribution on Local Stress and Strain Evolution in Spheroidized Medium Carbon Steels using Crystal Plasticity‐Based Numerical SimulationsSteel Research International, 2020
- In-situ observation of strain partitioning and damage development in continuously cooled carbide-free bainitic steels using micro digital image correlationMaterials Science and Engineering: A, 2019
- Experimental Investigations and Multiscale Modeling to Study the Effect of Sulfur Content on Formability of 16MnCr5 Alloy SteelSteel Research International, 2018
- Prediction of crack tip plasticity induced due to variation in solidification rate of weld pool and its effect on fatigue crack propagation rate (FCPR)Journal of Mechanical Science and Technology, 2018
- Microstructure-mechanical properties relationships for quenching and partitioning (Q&P) processed steelActa Materialia, 2016
- Failure mechanisms in DP600 steel: Initiation, evolution and fractureMaterials Science and Engineering: A, 2013
- Local plastic strain evolution in a high strength dual-phase steelMaterials Science and Engineering: A, 2010
- Damage of ductile materials deforming under multiple plastic or viscoplastic mechanismsInternational Journal of Plasticity, 2009
- Microstructure and damage initiation in duplex stainless steelsMaterials Science and Engineering: A, 2001
- Dislocation motion, constriction and cross-slip in fcc metalsModelling and Simulation in Materials Science and Engineering, 1998