Experimental control of kerf width taper during abrasive water jet machining
Authors:
- Sunkara Jaya KishoreSKSunkara Jaya Kishore
- P. Charan TejaPTP. Charan Teja
- K. Harshvardhan ReddyKRK. Harshvardhan Reddy
Open Access
- 1 January 2019
- journal article
- research article
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in FME Transactions
- Vol. 47 (3) , 585-590
Abstract
Abrasive water jet machining (AWJM) is one of the effective non-conventional machining processes. AWJM has its effective influence on aeronautical and automobile engineering industries. This paper aims to study the outcome of AWJM process parameters on kerf width and kerf taperness of Inconel-825. Taguchi's DOE is designed for experimental approach. Orthogonal array L25 is selected for experimental work. The influence of various process factors such as Transverse speed, Abrasive flow rate and stand-off distance on the kerf width and kerf taperness was studied. The consequence of the machining parameters was analysed and the optimum process parameters were identified with the help of Grey's relational analysis. Confirmation test was carried out with the optimum values of machining parameters such as Transverse speed-60mm/min, Abrasive Flow Rate-200gm/min and Stand off Distance-4mm in order to illustrate the effectiveness of Grey's relational analysis. The Optical microscopy confirmation test is performed for characterization of morphology and identification of micro cracks.Keywords
This publication has 16 references indexed in Scilit:
- Recent advances and challenges of abrasive jet machiningCIRP Journal of Manufacturing Science and Technology, 2018
- A novel approach to produce holes with high degree of cylindricity through Micro-Abrasive Jet Machining (μ-AJM)CIRP Journal of Manufacturing Science and Technology, 2018
- Development of Laval Nozzle for Micro Abrasive Jet Machining [MAJM] ProcessesProcedia Manufacturing, 2018
- Exploring kerf cut by abrasive waterjetThe International Journal of Advanced Manufacturing Technology, 2017
- Experimental Investigation and Analysis of Process Parameters in Abrasive Jet Machining of Ti-6Al-4V alloy using Taguchi MethodMaterials Today: Proceedings, 2017
- Influence of process parameters on abrasive particle motion characteristics in abrasive water jet descalingThe International Journal of Advanced Manufacturing Technology, 2016
- A review of the current state of abrasive water-jet turning machining methodThe International Journal of Advanced Manufacturing Technology, 2016
- Minimization of Kerf Taper Angle and Kerf Width Using Taguchi's Method in Abrasive Water Jet Machining of MarbleProcedia Materials Science, 2014
- Effect of abrasive water jet machining parameters on aramid fibre reinforced plastics compositeInternational Journal of Material Forming, 2008
- A study of taper angles and material removal rates of drilled holes in the abrasive water jet machining processJournal of Materials Processing Technology, 2007