An effective process to remove etch damage prior to selective epitaxial growth in 3D NAND flash memory
Authors:
- Liuyang LuoLLLiuyang Luo
- Zhiyong LuZLZhiyong Lu
- Xingqi ZouXZXingqi Zou
- Yu ZhangYZYu Zhang
- Bao ZhangBZBao Zhang
- Chenglin ZhaoCZChenglin Zhao
- Zhiguo ZhaoZZZhiguo Zhao
- Chunlong LiCLChunlong Li
- Zongliang HuoZHZongliang Huo
- 30 July 2019
- journal article
- research article
- Published by IOP Publishing in Semiconductor Science and Technology
- Vol. 34 (9) , 095004
Abstract
An effective post etch treatment (PET) process was proposed to eliminate etch damage in the channel hole, of which the depth and the aspect ratio is beyond 3 μ m and 30:1 respectively, prior to selective epitaxial growth (SEG) in three dimensions (3D) NAND flash memory. In this work, it is demonstrated that the damaged layer both at the channel hole bottom and sidewall induced by capacitively coupled plasma (CCP) was effectively eliminated using low energy plasma of CL 2 + NF 3 /CH 2 F 2 in PET, and then obtaining an excellent surface condition in channel hole and fabricating a void-free SEG epitaxial layer.Keywords
Funding Information
- the national key Research and Development Program of China (2018YFB1107700)
- National Science and Technology Major Project of China (2017ZX02301002)
This publication has 9 references indexed in Scilit:
- The Optimization of Gate All Around-L-ShapedBottom Select Transistor in 3D NAND Flash MemoryJournal of Nanoscience and Nanotechnology, 2018
- Investigation of Cl 2 etch in view of extremely low temperature selective epitaxial processesSemiconductor Science and Technology, 2017
- SiO2and Si3N4etch mechanisms in NF3/hydrocarbon plasmaJournal of Physics D: Applied Physics, 2006
- Study of the SiO2-to-Si3N4 etch selectivity mechanism in inductively coupled fluorocarbon plasmas and a comparison with the SiO2-to-Si mechanismJournal of Vacuum Science & Technology A, 1999
- A simple process to produce a high quality silicon surface prior to selective epitaxial growthIEEE Electron Device Letters, 1995
- Characterization and removal of silicon surface residue resulting from CHF3/C2F6 reactive ion etchingJournal of Applied Physics, 1994
- THE SELECTIVE EPITAXIAL GROWTH OF SILICONJournal de Physique IV, 1991
- Radio frequency plasma etching of Si/SiO2 by Cl2/O2 : Improvements resulting from the time modulation of the processing gasesJournal of Vacuum Science & Technology B, 1990
- Surface Damage on Si Substrates Caused by Reactive Sputter EtchingJapanese Journal of Applied Physics, 1981