Effect of Styrene Butadiene Rubber Latex on Mortar and Concrete Properties
Authors:
Open Access
- 1 July 2012
- journal article
- Published by Trans Tech Publications, Ltd. in Advanced Engineering Forum
- Vol. 5, 283-288
Abstract
The use of styrene butadiene rubber (SBR) emulsions in concrete has been increasing in concrete construction and repair work due to its benefits to flexure strength, adhesion and impermeability. This research evaluated the influence of different contents (0%, 5%, 10%, 15%, and 20% by cement) of SBR on the mechanical properties and anti-permeability of the paste, mortar and concrete with the same water-to-cement ratio to analysis the SBR on the properties of them. For the mechanical properties, the compressive strength, flexure strength and elastic modulus were studied. The permeability was assessed by total charge-passed derived from rapid chloride permeability test (RCPT), all the samples were prepared and measured complying with the corresponding Chinese Industry Standard. Experimental results showed that the properties of the SBR modified concrete were associated with the corresponding properties of the SBR modified mortar and paste, and their properties changed in the same way with the incorporation of the SBR latex.Keywords
This publication has 8 references indexed in Scilit:
- Experimental investigation on the properties of polymer modified SCCConstruction and Building Materials, 2012
- Effects of polymer modification on the permeability of cement mortars under different curing conditions: A correlational study that includes pore distributions, water absorption and compressive strengthConstruction and Building Materials, 2012
- Polymerised high internal phase emulsion cement hybrids: Macroporous polymer scaffolds for setting cementsCement and Concrete Research, 2011
- Interfacial interactions in concretes with silica fume and SBR latexConstruction and Building Materials, 2009
- High-Performance Plain and Fibrous Latex-Modified and Microsilica Concrete OverlaysJournal of Materials in Civil Engineering, 2008
- Physical and mechanical properties of styrene–butadiene rubber emulsion modified cement mortarsCement and Concrete Research, 2005
- Influence of water-cement ratio and cement content on the properties of polymer-modified mortarsCement and Concrete Research, 1999
- Composite mechanism of polymer modified cementCement and Concrete Research, 1995