Mechanical Characterization of E-Chopped Strand Glass Fiber Reinforced Wood/PVC Composites
Authors:
- 1 November 2007
- journal article
- Published by SAGE Publications in Journal of Thermoplastic Composite Materials
- Vol. 20 (6) , 535-550
Abstract
E-chopped strand glass fibers with different initial fiber lengths and contents are introduced into wood-polyvinyl chloride (PVC) composites having the wood content of 50 parts per hundred (phr). The initial fiber lengths and glass fiber contents varied from 3, 6, and 12 mm, and 10, 20, and 30 phr, respectively, and the mechanical and morphological properties of the wood/PVC composites are then monitored. The results suggest that the tensile and flexural moduli and strengths of the wood/PVC composites increase with increasing glass fiber contents. The tensile and flexural moduli and strengths of the WPVC composites at 10—20 phr glass fiber loadings are more dependent on carbonyl (C=O) content on the fiber surface, but those at 30 phr glass fiber loadings are influenced by the average final length of glass fibers. The impact strength of the wood/PVC composites progressively increase with increasing glass fiber content. The elongation at break is found to slightly decrease with increasing glass fiber content due to increases in fiber-end effects and stress concentrations in the wood/PVC composites. The effect of initial fiber length on the degree of composite shrinkage is very small, the values ranging from 0.3 to 1.3%.Keywords
This publication has 11 references indexed in Scilit:
- Mechanical and morphological properties of fly ash/epoxy composites using conventional thermal and microwave curing methodsComposites Science and Technology, 2007
- Miscibility of PVC/PMMA blends by vicat softening temperature, viscometry, DSC and FTIR analysisPolymer Testing, 2006
- Effects of compatibilizer type and rubber‐wood sawdust content on the mechanical, morphological, and thermal properties of PVC/LDPE blendJournal of Applied Polymer Science, 2006
- Glass fibre recycled poly(ethylene terephthalate) composites: mechanical and thermal propertiesPolymer Testing, 2005
- Average mixing torque, tensile and impact properties, and thermal stability of poly(vinyl chloride)/sawdust composites with different silane coupling agentsJournal of Applied Polymer Science, 2005
- Effect of moisture content on mechanical properties, thermal and structural stability and extrudate texture of poly(vinyl chloride)/wood sawdust compositesPolymer International, 2004
- Effect of wood sawdust content on rheological and structural changes, and thermo‐mechanical properties of PVC/sawdust compositesPolymer International, 2003
- Studies on mechanical performance of biofibre/glass reinforced polyester hybrid compositesComposites Science and Technology, 2003
- Effects of environmental aging on the mechanical properties of bamboo–glass fiber reinforced polymer matrix hybrid compositesComposites Part A: Applied Science and Manufacturing, 2002
- Effects of fiber length and fiber orientation distributions on the tensile strength of short-fiber-reinforced polymersComposites Science and Technology, 1996