Enabling the use of lithium bis(trifluoromethanesulfonyl)imide as electrolyte salt for Li‐ion batteries based on silicon anodes and Li(Ni0.4Co0.4Mn0.2)O2 cathodes by salt additives
Authors:
Open Access
- 6 March 2024
- journal article
- research article
- Published by Wiley in Batteries & Supercaps
- Vol. 7 (6)
Abstract
Lithium bis(trifluoromethanesulfonyl)imide (LiFSI) is a promising alternative salt for Li‐ion batteries. Unlike the conventional LiPF6, it is not prone to HF formation, and thus resistant to moisture. However, for cell voltages relevant for high energy cathodes (>4.2 V), the aluminium current collector will corrode in electrolytes based on this salt, and mitigation strategies are needed. Here, the use of Lithium tetrafluoroborate (LiBF4) and Lithium difluoro(oxalato)borate (LiDFOB) salts as additives is investigated, in order to enable the use of LiFSI‐based electrolytes. The performance of the electrolytes is evaluated separately for high content silicon anodes, (NMC442) cathodes and the aluminium current collector by electrochemical methods and post mortem analysis by SEM imaging and X‐ray photoelectron spectroscopy (XPS). Electrolytes with LiDFOB as additive showed the best performance for all components, and were therefore selected for cycling in full cells, composed of silicon anodes and NMC442. Results show that LiFSI‐based electrolytes with LiDFOB additive has an electrochemical performance similar to conventional electrolytes, and is thus a competitive, alternative electrolyte with a low fluorine content. Furthermore, it is verified that the good SEI forming properties of LiFSI based electrolytes known from cycling in half cells, is also preserved during cycling in full cellsKeywords
This publication has 77 references indexed in Scilit:
- Electrolyte Design Enabling a High‐Safety and High‐Performance Si Anode with a Tailored Electrode–Electrolyte InterphaseAdvanced Materials, 2021
- Building stable solid electrolyte interphases (SEI) for microsized silicon anode and 5V-class cathode with salt engineered nonflammable phosphate-based lithium-ion battery electrolyteApplied Surface Science, 2021
- Insight into the Solid Electrolyte Interphase Formation in Bis(fluorosulfonyl)Imide Based Ionic Liquid ElectrolytesAdvanced Functional Materials, 2021
- Effect of Dual‐Salt Concentrated Electrolytes on the Electrochemical Performance of Silicon NanoparticlesChemElectroChem, 2019
- Si anode for next-generation lithium-ion batteryCurrent Opinion in Electrochemistry, 2019
- Modulation of solid electrolyte interphase of lithium-ion batteries by LiDFOB and LiBOB electrolyte additivesApplied Surface Science, 2018
- Research Progress towards Understanding the Unique Interfaces between Concentrated Electrolytes and Electrodes for Energy Storage ApplicationsAdvanced Science, 2017
- Anodic Behavior of the Aluminum Current Collector in Imide‐Based Electrolytes: Influence of Solvent, Operating Temperature, and Native Oxide‐Layer ThicknessChemSusChem, 2017
- Lithium difluoro(oxalato)borate as an additive to suppress the aluminum corrosion in lithium bis(fluorosulfony)imide-based nonaqueous carbonate electrolyteJournal of Solid State Electrochemistry, 2015
- Safer Electrolytes for Lithium‐Ion Batteries: State of the Art and PerspectivesChemSusChem, 2015