Surface engineering of recycled high‐density polyethylene‐ based wood–polymer composites via carbon black‐containing surface film coating
Open Access
- 29 September 2026
- journal article
- Published by Wiley in Coloration Technology
Abstract
This study evaluates carbon black nanoparticle (CB NP)‐reinforced surface films for improving the durability, thermal stability, fire performance and mechanical retention of recycled high‐density polyethylene (HDPE)‐based wood‐plastic composites (WPCs) after 12 months of natural weathering. Characterisation was performed on film surfaces (colorimetry, fourier‐transform infrared spectroscopy [FTIR], field emission scanning electron microscopy [FE‐SEM]), isolated film layers (thermogravimetric analysis [TGA], differential scanning calorimetry [DSC]) and complete film–WPC systems (flexural properties, fire performance). CB NPs improved surface colour retention, which may be partly influenced by reduced spectrophotometric sensitivity of dark, broadband‐absorbing surface. Independently, stable FTIR peaks at 2915 and 2848 cm −1 , along with quantitatively stabilised carbonyl index (CI) values, demonstrated suppressed photo‐oxidative degradation at the polymer surface. Uncoated WPCs showed severe degradation, with a 47% reduction in modulus of rupture (MOR), along with surface cracking and interfacial debonding observed via FE‐SEM. Film coating slightly reduced MOR loss to 44%, whereas CB incorporation significantly limited it up to 19%. FE‐SEM confirmed reduced crack density, although some NP agglomeration was observed. TGA results indicated that CB increased T onset (~13%) and mitigated weathering‐induced reductions. DSC showed slight melting temperature increases and reduced crystallinity, while weathering promoted partial recrystallisation. Fire performance improved (~12.5%) with higher char formation. Overall, CB‐reinforced films enhance WPC durability for outdoor applications.Keywords
Funding Information
- Türkiye Bilimsel ve Teknolojik Araştırma Kurumu (222O246)
This publication has 31 references indexed in Scilit:
- Recent advances in fire‐retardant carbon‐based polymeric nanocomposites through fighting free radicalsSusmat, 2022
- Dimensional stability improvements of waste wood flour/HDPE composites via carbon black network embeddingConstruction and Building Materials, 2021
- A review of coextruded wood–plastic compositesPolymer Composites, 2021
- Conductive and fire-retardant wood/polyethylene composites based on a continuous honeycomb-like nanoscale carbon black networkConstruction and Building Materials, 2020
- Carbon black nano particle loaded lauric acid-based form-stable phase change material with enhanced thermal conductivity and photo-thermal conversion for thermal energy storageEnergy, 2020
- Weathering performance of waterborne acrylic coating systems on flat‐pressed wood–plastic compositesJournal of Applied Polymer Science, 2019
- Flame-retardant wood polymer composites (WPCs) as potential fire safe bio-based materials for building products: Preparation, flammability and mechanical propertiesFire Safety Journal, 2019
- Effect of silica nanopowder on the properties of wood flour/polymer compositePolymer Engineering & Science, 2012
- Effect of glass fiber hybridization on properties of sisal fiber–polypropylene compositesComposites Part B: Engineering, 2009
- Quiescent crystallization of natural fibers–polypropylene compositesJournal of Applied Polymer Science, 2007