Multipole magnets for the HIAF fragment separator using the Canted-Cosine-Theta (CCT) geometry
Authors:
Open Access
- 1 January 2020
- conference paper
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1401 (1) , 012015
Abstract
The fragment separator of the HIAF (High Intensity Heavy Ion Accelerator Facility) project called HFRS requires quadrupoles with high gradients (11.4 T/m) and large bores (320 mm in diameter). The iron dominated magnets with superconducting coils have been widely used in the similar facilities such as A1900, BigRIPS, Super!FRS and RISP with the advantages of low request for coils installation precision, simple fabrication and low cost, but they have large cold mass and helium containment, which result in long time cooling down and high pressure rise during a quench. In addition, due to iron saturation, it is hard to guarantee on the field quality in the operated field range. A new coil dominated design based on the Canted!Cosine!Theta geometry is presented for HFRS, which is expected to overcome these problems. The design superimposes several layers of oppositely wound helical windings to generate high quality quadrupole. Sextupole, octupole and steering dipole can also be easily integrated to reduce the length of cryostat. This paper reports the detailed design of HFRS multiplets based on the CCT concept and the construction of a subscale prototype.Keywords
This publication has 19 references indexed in Scilit:
- Toward the drip lines and the superheavy island of stability with the Super Separator Spectrometer S3The European Physical Journal A, 2015
- High Intensity heavy ion Accelerator Facility (HIAF) in ChinaNuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 2013
- Prototype of the Superferric Dipoles for the Super-FRS of the FAIR-ProjectIEEE Transactions on Applied Superconductivity, 2010
- An Air-Core Type Superconducting Quadrupole Triplet for the BigRIPS Separator at RIKENIEEE Transactions on Applied Superconductivity, 2008
- Prototype of Superferric Quadrupole Magnets for the BigRIPS Separator at RIKENIEEE Transactions on Applied Superconductivity, 2004
- Soft-edged magnet models for higher-order beam-optics map codesNuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 2004
- The double-helix dipole-a novel approach to accelerator magnet designIEEE Transactions on Applied Superconductivity, 2003
- In-flight RI beam separator BigRIPS at RIKEN and elsewhere in JapanNuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 2003
- Magnetic Elements for the A1900 Fragment Separator at the NSCL1998
- A new configuration for a dipole magnet for use in high energy physics applicationsNuclear Instruments and Methods, 1970