A method for detecting alignment deviation on a thread-measuring instrument
Authors:
- 20 June 2013
- journal article
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 24 (8) , 085002
Abstract
Alignment deviation is an important factor affecting measurement accuracy in screw thread measurement. It needs to be detected and controlled to ensure the accuracy of relative thread parameters. The influence on pitch diameter caused by the alignment deviations of workpiece and probe is analyzed in this paper. In order to detect and control the alignment deviation, a vision detection method for the probe tip points is proposed, which integrates the detection of corners and edges and the prediction of motion. Then the X-axial rotation deviation is calculated by tracking the tip points both up and down. The result of tests demonstrates that the detection accuracy of the X-axial rotation deviation is 0.0654° with the background changing during the probe movement. The repeatability of the test procedure is ±0.16%, which proves the detection method is adequately qualified for application.Keywords
This publication has 12 references indexed in Scilit:
- Automated setup for non-tactile high-precision measurements of roundness and cylindricity using two laser interferometersMeasurement Science and Technology, 2012
- A non-contact control architecture for micro-components assemblyCIRP Journal of Manufacturing Science and Technology, 2011
- Comparising measuring methods of pitch diameter of thread gauges and analysis of influences on the measurement resultsMeasurement, 2010
- Alignment problem while measuring thread pitch of large thread gauges on the profile-measuring machinesThe International Journal of Advanced Manufacturing Technology, 2009
- Determining alignment in measurement of a large-diameter thread by means of devices for profile measurementMeasurement Techniques, 2008
- Vision-guided fixtureless assembly of automotive componentsRobotics and Computer-Integrated Manufacturing, 2003
- A New Method for Thread Calibration on Coordinate Measuring MachinesCIRP Annals, 2003
- Gaussian-based edge-detection methods-a surveyIEEE Transactions on Systems, Man and Cybernetics, Part C (Applications and Reviews), 2002
- Fast corner detectionImage and Vision Computing, 1998
- SUSAN—A New Approach to Low Level Image ProcessingInternational Journal of Computer Vision, 1997