Bowed Stators: An Example of CFD Applied to Improve Multistage Compressor Efficiency
Authors:
- 1 April 1997
- journal article
- Published by Wiley in Journal of Turbomachinery
- Vol. 119 (2) , 161-168
Abstract
Analysis of multistage compressor stator surface static pressure data reveals that the radial growth of suction surface corner separation prematurely separates core flow stator sections, limiting their pressure rise capability and generating endwall loss. Modeling of the stator flowfield, using a three-dimensional Euler analysis, has led to the development of “bowed” stator shapes, which generate radial forces that reduce diffusion rates in the suction surface corners, in order to delay the onset of corner separation. Experimental testing of the bowed stator concept in a three-stage research compressor has confirmed the elimination of suction surface corner separation, the resulting reduction of the endwall loss, and the increase in pressure rise capability of the stator core sections. This results in more robust pressure rise characteristics and substantially improved efficiency over the entire flow range of the compressor. The strong interaction effects of the bowed stator with the viscous endwall flowfield are shown to be predictable using a three-dimensional multistage Navier–Stokes analysis. This permits matching of the rotors to the altered stator exit profiles, in order to avoid potential stability limiting interactions. Application of bowed stators to a high bypass ratio engine eleven-stage high-pressure compressor has resulted in substantial improvement in efficiency, with no stability penalty.Keywords
This publication has 18 references indexed in Scilit:
- Performance Improvements of Compressor Cascades by Controlling the Profile and Sidewall Boundary LayersJournal of Turbomachinery, 1992
- Three-Dimensional Separated Flow Field in the Endwall Region of an Annular Compressor Cascade in the Presence of Rotor-Stator Interaction: Part 1—Quasi-Steady Flow Field and Comparison With Steady-State DataJournal of Turbomachinery, 1990
- The Use of Surface Static Pressure Data as a Diagnostic Tool in Multistage Compressor DevelopmentJournal of Turbomachinery, 1987
- Stator Endwall Leading-Edge Sweep and Hub Shroud Influence on Compressor PerformanceJournal of Turbomachinery, 1986
- The Development of a Second Generation of Controlled Diffusion Airfoils for Multistage CompressorsJournal of Turbomachinery, 1986
- Experimental Study of Three-Dimensional Flow in an Axial Compressor Stage1986
- Axial Compressor Stator AerodynamicsJournal of Engineering for Gas Turbines and Power, 1985
- Loss Reduction in Axial-Flow Compressors Through Low-Speed Model TestingJournal of Engineering for Gas Turbines and Power, 1985
- Influence Of Dihedral on the Secondary Flow in a Two-Dimensional Compressor CascadeJournal of Engineering for Gas Turbines and Power, 1984
- Development of Controlled Diffusion Airfoils for Multistage Compressor ApplicationJournal of Engineering for Gas Turbines and Power, 1984