Material properties of ion beam deposited oxides for the optoelectronic industry
Authors:
- 1 May 2002
- journal article
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 20 (3) , 1135-1140
Abstract
High quality, dense films of SiO2, Al2O3, Ta2O5, and TiO2 were deposited with an ion beam deposition system (IBD). IBD has significant advantages over other techniques in terms of directionality, stress control, repeatability, thermal stability, and film uniformity [J. J. Cuomo, J. M. E. Harper, C. R. Guarnieri, D. S. Yee, L. J. Atanasio, J. Angilello, C. T. Wu, and R. H. Hammond, J. Vac. Sci. Technol. 20, 349 (1982)]. To decrease the surface damage induced by ion bombardment, a multi-energy process was developed. This is especially important for laser facet coatings. The oxide films were optimized for the desired refractive index and zero absorption. Stress values of −0.2 to −0.5 GPa (compressive) and extremely good uniformity (<0.2%) of film thickness and refractive index were obtained. The impact of the IBD deposition angle on film stress was also investigated. These films showed excellent thermal stability with virtually no degradation of optical properties after three 1 h anneals at 350 °C (Δn<0.0124). With the exception of TiO2, all films remained in compressive stress after annealing. TiO2 turned tensile. With the variety of oxide materials developed, designing an anti-reflective or highly reflective stack, which satisfies requirements of stress, uniformity, deposition rate, and reflectance, becomes a matter of choosing the appropriate material set.Keywords
This publication has 6 references indexed in Scilit:
- Ion beam deposition of permanent magnet layers for liftoff processesJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1999
- 10 Gbit/s, 1.56 μm multiquantum well InP/InGaAsP Mach–Zehnder optical modulatorElectronics Letters, 1993
- Systematics of laser operation in GaAs/AlGaAs multiquantum well heterostructuresIEEE Journal of Quantum Electronics, 1987
- IV Multilayer Antireflection Coatings1970
- Simple Construction for Determining the Phase Change of Light Reflected at Normal IncidenceApplied Optics, 1965
- On a Method of Decreasing the Reflection from Nonmetallic SubstancesJournal of the Optical Society of America, 1936