Synthesis and characterization of a Li-rich layered cathode material Li1.15[(Mn1/3Ni1/3Co1/3)0.5(Ni1/4Mn3/4)0.5]0.85O2 with spherical core–shell structure
Authors:
- 1 January 2012
- journal article
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry
- Vol. 22 (37) , 19666-19672
Abstract
A Li-rich layered cathode material Li1.15[(Ni1/3Co1/3Mn1/3)0.5(Ni1/4Mn3/4)0.5]0.85O2 with a spherical core–shell structure was firstly synthesized by a co-precipitation route. In this material, the Li1.15[Ni1/3Co1/3Mn1/3]0.85O2 core was completely encapsulated by a Li1.15[Ni1/4Mn3/4]0.85O2 shell. The structure and morphology of the as-prepared core–shell structured material were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The XRD results indicate that the core–shell structured material has a typical layered structure with the existence of a Li2MnO3-type integrated component. Spherical morphologies with an inner core and outer shell layer are clearly observed by SEM. A half cell using the core–shell structured cathode material showed a high capacity of 242 mA h g−1 at a rate of 0.1 C in a voltage range of 2.0–4.8 V. Especially, the core–shell structured cathode material represents excellent lithium intercalation stability compared to the Li1.15[Mn1/3Co1/3Mn1/3]0.85O2 core, and an improved rate capability compared to the Li1.15[Ni1/4Mn3/4]0.85O2 shell. A synergetic effect of the positive attributes of the two materials is achieved by the formation of the core–shell architecture. Therefore, the as-prepared core–shell structured Li1.15[(Mn1/3Ni1/3Co1/3)0.5(Ni1/4Mn3/4)0.5]0.85O2 is very effective for improving the electrochemical behavior of Li-rich layered cathode materials in the high-performance lithium ion batteries.Keywords
This publication has 32 references indexed in Scilit:
- Electrical Energy Storage for the Grid: A Battery of ChoicesScience, 2011
- Composition-Tailored Synthesis of Gradient Transition Metal Precursor Particles for Lithium-Ion Battery Cathode MaterialsChemistry of Materials, 2011
- Spherical core-shell Li[(Li0.05Mn0.95)0.8(Ni0.25Mn0.75)0.2]2O4 spinels as high performance cathodes for lithium batteriesEnergy & Environmental Science, 2011
- Comments on the structural complexity of lithium-rich Li1+xM1−xO2 electrodes (M=Mn, Ni, Co) for lithium batteriesElectrochemistry Communications, 2006
- Demonstrating Oxygen Loss and Associated Structural Reorganization in the Lithium Battery Cathode Li[Ni0.2Li0.2Mn0.6]O2Journal of the American Chemical Society, 2006
- Improved Electrochemical Properties and Structural Stability of Overlithiated Li[sub 1+x](Ni[sub 1∕3]Co[sub 1∕3]Mn[sub 1∕3])[sub 1−x]O[sub 2] Prepared by Spray-Drying MethodElectrochemical and Solid-State Letters, 2006
- Comparison of the Electrochemical Behaviors of Stoichiometric LiNi[sub 1/3]Co[sub 1/3]Mn[sub 1/3]O[sub 2] and Lithium Excess Li[sub 1.03](Ni[sub 1/3]Co[sub 1/3]Mn[sub 1/3])[sub 0.97]O[sub 2]Electrochemical and Solid-State Letters, 2004
- Understanding the Anomalous Capacity of Li/Li[Ni[sub x]Li[sub (1/3−2x/3)]Mn[sub (2/3−x/3)]]O[sub 2] Cells Using In Situ X-Ray Diffraction and Electrochemical StudiesJournal of the Electrochemical Society, 2002
- Expansion of Active Site Area and Improvement of Kinetic Reversibility in Electrochemical Pseudocapacitor ElectrodeElectrochemical and Solid-State Letters, 2001
- Cobalt dissolution in LiCoO2-based non-aqueous rechargeable batteriesSolid State Ionics, 1996