In-Situ Modulus Determination Using Dispersion Curves Developed From the Deflection-Time History Data
- 8 March 2022
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Transportation Systems
- Vol. 23 (11) , 22053-22062
Abstract
The advanced non-destructive tests (NDT) have become increasingly popular in the structural performance evaluation of transportation infrastructures including pavements. Among them, Falling Weight Deflectometer (FWD) and Spectral Analysis of Surface Waves (SASW) are the two most widely used methods in modulus measurement. Although popularly used, FWD methods base the analysis purely on the deflection characteristics of the pavement and the back-calculated modulus values are usually not unique for different data processing methods. SASW is based on fundamental spectral analysis of the Rayleigh waves but is practically limited in field operation due to its efficiency concern. On the other hand, the impact loading applied by the FWD will generate the Rayleigh wave, and the geophones used in FWD can capture Rayleigh wave fluctuation and measure the particle motion for phase velocity calculations. It is theoretically possible to use the deflection-time history collected by FWD to perform dispersion analysis based on the Rayleigh wave propagation theory, as used in the SASW method. Inspired from that, the main objective of this paper is to propose a new approach of using the deflection-time history collected by FWD to develop the dispersion curves and thus obtain the in-situ modulus of the layered asphalt pavement. This approach is referred as the FWD dispersion curve method. Two in-service semirigid base asphalt pavement segments were used as case studies to explain the new methodology. The results of layered modulus from the FWD dispersion curve method were compared with the traditional FWD and SASW method, as well as the laboratory Indirect Tensile (IDT) testing results using field cores. Findings demonstrated the feasibility of the FWD dispersion curve method in accurately capturing the layered modulus profile of the asphalt pavements.Keywords
This publication has 23 references indexed in Scilit:
- Effects of site stiffness and source to receiver distance on surface wave tests׳ resultsSoil Dynamics and Earthquake Engineering, 2015
- Consistency and accuracy of selected FWD backcalculation software for computing layer modulus of airport pavementsInternational Journal of Geotechnical Engineering, 2013
- An overview of surface wave methods and a reliability study of a simplified inversion techniqueSoil Dynamics and Earthquake Engineering, 2011
- A Comparison of Shear Wave Velocity Profiles from SASW, MASW, and ReMi Techniques2008
- An Integration Algorithm for Evaluation of Pavement Systems2006
- Fast simulated annealing inversion of surface waves on pavement using phase-velocity spectraGeophysics, 2006
- Integrating Seismic and Deflection Methods to Estimate Pavement ModuliTransportation Research Record: Journal of the Transportation Research Board, 2001
- A New Backcalculation Procedure Based on Dispersion Analysis of FWD Time-History Deflections and Surface Wave Measurements Using Artificial Neural Networks2000
- Prediction of Layer Moduli from Falling Weight Deflectometer and Surface Wave Measurements Using Artificial Neural NetworkTransportation Research Record: Journal of the Transportation Research Board, 1998
- Surface wave technique for measuring the elastic properties and thickness of roads: Theoretical developmentBritish Journal of Applied Physics, 1962