Three-Dimensional Printing of Ultrasoft Silicone with a Functional Stiffness Gradient
Open Access
- 1 April 2024
- journal article
- research article
- Published by SAGE Publications in 3D Printing and Additive Manufacturing
- Vol. 11 (2) , 435-445
Abstract
A methodology for three-dimensionally printing ultrasoft silicone with a functional stiffness gradient is presented. Ultraviolet-cure silicone was deposited via two independently controlled extruders into a thixotropic, gel-like, silicone oil-based support matrix. Each extruder contained a different liquid silicone formulation. The extrusion rates were independently varied during printing such that the combined selectively deposited material contained different ratios of the two silicones, resulting in localized control of material stiffness. Tests to validate the process are reported, including tensile testing of homogeneous cubic specimens to quantify the range of material stiffness that could be printed, indentation testing of cuboid specimens to characterize printed stiffness gradients, and vibratory testing of synthetic multilayer vocal fold (VF) models to demonstrate that the method may be applied to the fabrication of biomechanical models for voice production research. The cubic specimens exhibited linear stress–strain data with tensile elasticity modulus values between 1.11 and 27.1 kPa, more than a factor of 20 in stiffness variation. The cuboid specimens exhibited material variations that were visually recognizable and quantifiable via indentation testing. The VF models withstood rigorous phonatory flow-induced vibration and exhibited vibratory characteristics comparable to those of previous models. Overall, while process refinements are needed, the results of these tests demonstrate the ability to print ultrasoft silicone with stiffness gradients.Keywords
This publication has 32 references indexed in Scilit:
- The effect of vocal fold vertical stiffness variation on voice productionThe Journal of the Acoustical Society of America, 2016
- MultiFabACM Transactions on Graphics, 2015
- Characterization of the Vocal Fold Vertical Stiffness in a Canine ModelJournal of Voice, 2014
- Digital material fabrication using mask‐image‐projection‐based stereolithographyRapid Prototyping Journal, 2013
- Vibratory responses of synthetic, self-oscillating vocal fold modelsThe Journal of the Acoustical Society of America, 2012
- In Vitro Experimental Investigation of Voice ProductionCurrent Bioinformatics, 2011
- Flow-induced vibratory response of idealized versus magnetic resonance imaging-based synthetic vocal fold modelsThe Journal of the Acoustical Society of America, 2010
- Mammalian laryngseal air sacs add variability to the vocal tract impedance: Physical and computational modelingThe Journal of the Acoustical Society of America, 2008
- Influence of supraglottal structures on the glottal jet exiting a two-layer synthetic, self-oscillating vocal fold modelThe Journal of the Acoustical Society of America, 2008
- High‐Precision Measurement of the Vocal Fold Length and Vibratory AmplitudesThe Laryngoscope, 2002