Abstract
The Benchmark Active Controls Technology (BACT) project is part of NASA Langley Research Center's Benchmark Models Program for studying transonic aeroelastic phenomena. In January of 1996 the BACT wind-tunnel model was used to successfully demonstrate the application of robust multivariable control design methods (H ∞ and µ-synthesis) to flutter suppression. This paper addresses the design and experimental evaluation of robust multivariable flutter suppression control laws with particular attention paid to the degree to which stability and performance robustness was achieved. approach also served to reduce the risk of implementing active flutter suppression and thereby increase the probability of achieving the program objectives. The SISO control results also provided a benchmark for evaluating the benefits of multi-input/multi-output (MIMO) control. The second stage involved the design and test of MIMO controllers to demonstrate the potential for enhanced performance and robustness afforded by the robust multivariable design methods. The design strategy involved using a single fixed control law to suppress flutter over the anticipated range of wind-tunnel operating conditions (rather than using a scheduled control law, for example). This served to simplfy the controller implementation and data analysis, and is representative of how flutter suppression could be effectively implemented on an actual aircraft. This same strategy was applied to both the SISO and MIMO control law designs. Before the design and analysis of the control laws is discussed a short description of the wind- tunnel model and the mathematical model used for the control design is presented. The design objectives are then discussed followed by discussions of the SISO and MIMO design efforts. Finally, analysis and wind-tunnel test results will be presented.