Synthesis and properties of a novel bismaleimide resin containing 1,3,4‐oxadiazole moiety and the blend systems thereof with epoxy resin
Authors:
- 31 May 2011
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 51 (8) , 1599-1606
Abstract
A new bismaleimide monomer, 2‐((4‐maleimidophenoxy)methyl)‐5‐(4‐maleimidophenyl)‐1,3,4‐oxadiazole (Mioxd), was designed and synthesized. The chemical structure of the monomer was confirmed by means of Fourier transform infrared (FTIR) spectroscopy, proton nuclear magnetic resonance (1H NMR) spectroscopy and elemental analysis, and its thermal properties were characterized using differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Mioxd as a reactive modifier was blended with epoxy resin based on bisphenol A diglycidyl ether (DGEBA) in weight ratio of 5, 10, and 15%, using 4,4′‐diaminodiphenyl sulfone (DDS) as hardener. The effect of Mioxd addition on the cure behavior and thermal properties of the blend resins was studied by DSC, TGA, and dynamic mechanical analysis (DMA). DSC investigations showed that the main exothermic peak temperature (Tp) of the blend systems did not obviously shift with increasing Mioxd content whereas a new shoulder appeared and gradually grew on the high temperature side of the exothermic peak. The results of DMA measurements exhibited the glassy storage modulus (G') and glass transition temperatures (Tg) increased as the Mioxd content was increased, the cured blends investigated were miscible and no phase separation occurred. Further, the thermal decomposition temperature first decreased and then increased, but the char yield at 600°C increased with an increase in Mioxd content. POLYM. ENG. SCI., 2011. © 2011 Society of Plastics EngineersKeywords
Funding Information
- National Natural Science Foundation of China (50703024)
- Liaoning Provincial Science and Technology Plan Project (2007403009)
- Innovative Research Team Program in University of Liaoning Education Department (LT2010083)
This publication has 36 references indexed in Scilit:
- New fluorinated poly(1,3,4-oxadiazole-ether-imide)sPolymer, 2005
- Synthesis of Bismaleimides Bearing Electron-Donating Chromophores and Their Fluorescence Behavior during CopolymerizationMacromolecules, 2003
- Synthesis, Characterization, and Study of the Thermal Properties of New Poly(arylene ether 1,3,4-oxadiazole)sMacromolecules, 2000
- Synthesis and properties of phosphorus containing copoly(bismaleimide)Polymer, 1999
- Synthesis and characterization of novel poly(arylene ether)s containing 1,3,4-oxadiazole unitsMacromolecular Rapid Communications, 1999
- Novel bismaleimide with naphthalene side group. 1. From 1-naphthaldehyde and 2,6-dimethylanilinePolymer, 1998
- Synthesis and properties of novel naphthalene-containing bismaleimidesJournal of Applied Polymer Science, 1996
- Curing, compatibility, and fracture toughness for blends of bismaleimide and a tetrafunctional epoxy resinPolymer Engineering & Science, 1996
- Synthesis and characterization of bismaleimide–polyurethane crosslinked copolymersJournal of Polymer Science Part A: Polymer Chemistry, 1995
- Characterization of epoxy-bismaleimide network matricesJournal of Materials Science, 1987