Rheological measurements on dense suspensions containing dendrite-like particles
Open Access
- 12 June 2026
- journal article
- Published by American Physical Society (APS) in Physical Review E
- Vol. 114 (1)
Abstract
During alloy solidification, equiaxed dendrites often move within the solidifying liquid. As this motion is one of the main causes of macrosegregation, a deeper understanding of the behavior of suspensions containing dendrite-like particles is particularly important. Inspired by rheological investigations with dense suspensions containing spheres, pressure-imposed rheological measurements using an annular shear cell were performed and applied to suspensions containing 3D-printed dendrite-like particles. The results indicate that the concept of the friction coefficient for spheres can be adapted by using appropriate coefficients and suitably reduced mechanical coherency limits. Consequently, the particle pressure of interacting, moving dendrite-like particles in liquids can be effectively described. However, direct measurement of the shear rate was not possible due to the shallowness of the rheological cell used. Nevertheless, the viscosity of suspension containing dendrite-like particles could be estimated indirectly by adapting the dimensionless friction number originally proposed for suspensions with spheres. An increase in viscosity at the same reduced solid fraction, due to the specific morphology of the dendrite-like particles, is predicted. While spheres predominantly interact by sliding past one another, dendrite-like particles—particularly those with long sidearms—interact mainly through rotation.Keywords
Funding Information
- Austrian Science Fund (10.55776/P34993)
This publication has 29 references indexed in Scilit:
- Columnar and Equiaxed Solidification of Al-7 wt.% Si Alloys in Reduced Gravity in the Framework of the CETSOL ProjectJOM, 2017
- Modeling of globular equiaxed solidification with a two-phase approachMetallurgical and Materials Transactions A, 2002
- Two-phase modeling of mushy zone parameters associated with hot tearingMetallurgical and Materials Transactions A, 2000
- Equiaxed dendritic solidification with convection: Part I. Multiscale/multiphase modelingMetallurgical and Materials Transactions A, 1996
- Equiaxed dendritic solidification with convection: Part II. Numerical simulations for an Al-4 Wt pct Cu alloyMetallurgical and Materials Transactions A, 1996
- Calculation of dendrite settling velocities using a porous envelopeMetallurgical Transactions B, 1993
- A volume-averaged two-phase model for transport phenomena during solidificationMetallurgical Transactions B, 1991
- Rheology of monodisperse laticesAdvances in Colloid and Interface Science, 1972
- Berichtigung zu meiner Arbeit: „Eine neue Bestimmung der Moleküldimensionen”︁Annalen der Physik, 1911
- Eine neue Bestimmung der MoleküldimensionenAnnalen der Physik, 1906