Influence of nanoclay on urea‐formaldehyde resins for wood adhesives and its model
- 7 May 2008
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 109 (4) , 2442-2451
Abstract
The addition of small percentages of Na+‐montmorillonite (NaMMT) nanoclay appears to improve considerably the performance of thermosetting urea‐formaldehyde (UF) resins used as adhesives for plywood and for wood particleboard. X‐ray diffraction (XRD) studies indicated that NaMMT loses the periodic atomic structure when mixed in small proportions in the acid‐curing environment characteristic of the curing of UF resins. This can be interpreted as becoming exfoliated under such conditions. The partly crystalline structure of the ordered zones of the UF resins is maintained but at a slightly lower level. Differential scanning calorimetry (DSC) indicated that NaMMT has an accelerating effect on the curing of the UF resin. It also appears to lead to a more controlled rate of crosslinking implying a more regular hardened network. The influence of NaMMT addition was particularly noted in plywood by the increase in water resistance of the UF‐bonded panel. In the case of wood particleboard even the dry internal bond strength of the panel, a direct indication of the performance of the resin, improved with small additions of NaMMT. A hypothesis and model of the reasons why such improvement to the performance of UF resins by addition of nanoclay should occur has been presented. This is based on the application of percolation theory to the networking capability of the clay nanoplatelets. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008Keywords
This publication has 24 references indexed in Scilit:
- Influence of nanoclay on properties of HDPE/wood compositesJournal of Applied Polymer Science, 2007
- Conducting Polyaniline Confined in Semi-Interpenetrating NetworksMacromolecular Rapid Communications, 2002
- Scalar and vectorial percolation in compressed expanded graphitePhysica A: Statistical Mechanics and its Applications, 2001
- Critical concentration in percolating systems containing a high-aspect-ratio fillerPhysical Review B, 1996
- Theory and Practice of the Preparation of Low Formaldehyde Emission UF AdhesivesHolzforschung, 1994
- Synthesis and properties of polyimide–clay hybridJournal of Polymer Science Part A: Polymer Chemistry, 1993
- Synthesis of nylon 6-clay hybridJournal of Materials Research, 1993
- Excluded volume and its relation to the onset of percolationPhysical Review B, 1984
- Mica as a Reinforcement for Plastics1974
- Hydration Status of Adsorbed CationsSoil Science Society of America Journal, 1966