Mechanical and Electrical Properties of Polyethylene Terephthalate Glycol/Antimony Tin Oxide Nanocomposites in Material Extrusion 3D Printing
Authors:
- Markos PetousisMarkos Petousis
- Nikolaos MichailidisNikolaos Michailidis
- Vassilis SaltasVassilis Saltas
- Vassilis PapadakisVassilis Papadakis
- Mariza SpiridakiMSMariza Spiridaki
- Nikolaos MountakisNMNikolaos Mountakis
- Apostolos ArgyrosAAApostolos Argyros
- John ValsamosJVJohn Valsamos
- Nektarios K. NasikasNektarios K. Nasikas
- Nectarios VidakisNVNectarios Vidakis
Open Access
- 26 April 2024
- journal article
- research article
- Published by MDPI AG in Nanomaterials
- Vol. 14 (9) , 761
Abstract
In this study, poly (ethylene terephthalate) (PETG) was combined with Antimony-doped Tin Oxide (ATO) to create five different composites (2.0–10.0 wt.% ATO). The PETG/ATO filaments were extruded and supplied to a material extrusion (MEX) 3D printer to fabricate the specimens following international standards. Various tests were conducted on thermal, rheological, mechanical, and morphological properties. The mechanical performance of the prepared nanocomposites was evaluated using flexural, tensile, microhardness, and Charpy impact tests. The dielectric and electrical properties of the prepared composites were evaluated over a broad frequency range. The dimensional accuracy and porosity of the 3D printed structure were assessed using micro-computed tomography. Other investigations include scanning electron microscopy and energy-dispersive X-ray spectroscopy, which were performed to investigate the structures and morphologies of the samples. The PETG/6.0 wt.% ATO composite presented the highest mechanical performance (21% increase over the pure polymer in tensile strength). The results show the potential of such nanocomposites when enhanced mechanical performance is required in MEX 3D printing applications, in which PETG is the most commonly used polymer.Keywords
This publication has 118 references indexed in Scilit:
- 3D Printing of Multilayered and Multimaterial Electronics: A ReviewAdvanced Electronic Materials, 2021
- Sustainable approach to produce 3D‐printed continuous carbon fiber composites: “A comparison of virgin and recycled PETG”Polymer Composites, 2021
- Investigation of 3D printing strategy on the mechanical performance of coextruded continuous carbon fiber reinforced PETGJournal of Applied Polymer Science, 2021
- Thermal degradation kinetics study of molten polylactide based on Raman spectroscopyPolymer Engineering & Science, 2020
- Laser‐Based Additive Manufacturing Technologies for Aerospace ApplicationsAdvanced Engineering Materials, 2019
- Crystallization behavior of poly(ε‐caprolactone)/layered double hydroxide nanocompositesJournal of Applied Polymer Science, 2010
- Synergistic enhancement in tensile strength and ductility of ABS by using recycled PETG plasticJournal of Applied Polymer Science, 2009
- Novel Nanoparticle‐Reinforced Metal Matrix Composites with Enhanced Mechanical PropertiesAdvanced Engineering Materials, 2007
- Lowering the percolation threshold of conductive composites using particulate polymer microstructureJournal of Applied Polymer Science, 2001
- Ceramic‐reinforced polymers and polymer‐modified ceramicsPolymer Engineering & Science, 1996