Green synthesis of zeolite and its regeneration for adsorption of ammonia nitrogen in water
Authors:
Preprint
- 4 October 2024
- preprint
- Published by Springer Nature in Research Square
Abstract
This study presents a novel green approach for the preparation of zeolite material from fly ash using a combination of mechanochemical method. Compared to traditional methods, this approach reduces energy consumption, minimizes reagent usage, and facilitates the efficient recycling of fly ash. The physicochemical properties of the synthesized zeolite, including crystal structure and porosity, were systematically investigated. The synthesized zeolite was employed for the adsorption of ammonia nitrogen from aqueous solutions, and their adsorption kinetics and thermodynamics were comprehensively studied. The results revealed that the adsorption of ammonia nitrogen onto the zeolite follows the Langmuir adsorption model. Additionally, the zeolite exhibited strong selective adsorption and remarkable resistance to interference from coexisting cations in the aqueous solution. Finally, regeneration experiments were conducted using NaCl, NaClO, and their mixtures to desorb ammonia nitrogen from the spent zeolite. A total of 17 regeneration cycles were performed until the adsorption capacity of the zeolites was exhausted. The adsorption performance of the regenerated zeolite was evaluated to assess the impact of different reagents and regeneration cycles on adsorption efficiency. The optimal regeneration method was identified, leading to the successful valorization of fly ash into zeolite for ammonia adsorption and the development of effective regeneration strategies for spent zeolite.Keywords
All Related Versions
This publication has 30 references indexed in Scilit:
- A novel and convenient zeolite modification strategy for enhancing the fire resistance of epoxy resinChemical Engineering Journal, 2024
- Zeolite supported zinc oxide nanoparticles composite: Synthesis, characterization, and photocatalytic activity for methylene blue dye degradationDesalination and Water Treatment, 2024
- Atmosphere matters: The protection of wet ball milling instead of dry ball milling accelerates the electron transfer effect of sulfurized micron iron/biochar to Cr (VI)Chemical Engineering Journal, 2024
- Effect of Al2O3/SiO2 mass ratio on the structure and properties of medical neutral boroaluminosilicate glass based on XPS and infrared analysisCeramics International, 2023
- Design of phosphorus-doped porous hard carbon/Si anode with enhanced Li-ion kinetics for high-energy and high-power Li-ion batteriesChemical Engineering Journal, 2023
- Enhanced removal of ammonia nitrogen from rare earth wastewater by NaCl modified vermiculite: Performance and mechanismChemosphere, 2022
- Characterisation of ultra-fine fly ash as sustainable cementitious material for masonry constructionAin Shams Engineering Journal, 2021
- Design of compressible flame retardant grafted porous organic polymer based separator with high fire safety and good electrochemical propertiesChemical Engineering Journal, 2021
- Environmental application of magnetic cellulose derived from Pennisetum sinese Roxb for efficient tetracycline removalCarbohydrate Polymers, 2021
- Preservation of Fe complexes into layered double hydroxides improves the efficiency and the chemical stability of Fe complexes used as heterogeneous photo-Fenton catalystsApplied Surface Science, 2013