An underwater shock simulator
Authors:
- 17 January 2006
- journal article
- research article
- Published by The Royal Society in Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences
- Vol. 462 (2067) , 1021-1041
Abstract
An underwater shock simulator has been developed for the underwater shock loading of materials and test structures within the laboratory. The tube is struck at one end by a steel projectile, with the test structure placed at the opposite end of the tube. Realistic exponentially decaying pressure pulses are generated in the water with peak pressures in the range 15–70 MPa and decay times ranging from 0.1 to 1.5 ms. The peak pressure and the pulse duration are independently adjusted by varying the projectile velocity and mass, respectively. The underwater shock simulator is used to investigate the one-dimensional fluid–structure interaction of sandwich plates with steel face sheets and an aluminium foam core. The degree of core compression is measured as a function of both the underwater shock impulse and the Taylor fluid–structure interaction parameter. Fully coupled finite element simulations agree well with the measurements while decoupling the fluid–structure interaction phase from the core compression phase within the finite element analysis leads to an under-prediction of the degree of core compression.Keywords
This publication has 21 references indexed in Scilit:
- One-dimensional response of sandwich plates to underwater shock loadingJournal of the Mechanics and Physics of Solids, 2005
- Metal sandwich plates optimized for pressure impulsesInternational Journal of Mechanical Sciences, 2005
- The Resistance of Clamped Sandwich Beams to Shock LoadingJournal of Applied Mechanics, 2004
- Energy Absorption in Closed-Cell Al-Zn-Mg-Ca-Ti FoamMATERIALS TRANSACTIONS, 2002
- High strain rate compression of closed-cell aluminium foamsMaterials Science and Engineering: A, 2000
- Deformation of thin plates subjected to impulsive loading—A reviewInternational Journal of Impact Engineering, 1989
- Broken beamsExperimental Mechanics, 1973
- Transient shell response by numerical time integrationInternational Journal for Numerical Methods in Engineering, 1973
- Interaction between structures and bilinear fluidsInternational Journal of Solids and Structures, 1970
- Circular plate under a uniformly distributed impulseInternational Journal of Solids and Structures, 1966