Deep Learning to Predict Deterioration Region of Hot Ductility in High-Mn Steel by Using the Relationship between RA Behavior and Time-Temperature-Precipitation
Open Access
Abstract
Reduction of area (RA) measurement in a hot ductility test is widely used to define the susceptibility of surface crack of cast steel, but the test is complex because it entails processes such as specimen fabrication, heat treatment, tensile testing, and analysis. As an alternative, this study proposes a model that can predict RA. The model exploits the relationship between precipitation and RA behavior, which has a major effect on hot ductility degradation in high-Mn steels. Hot ductility tests were performed using four grades of high-Mn steels that had different V-Mo compositions, and the RA behavior was compared with the precipitation behavior obtained from a time-temperature-precipitation (TTP) graph. The ductility deterioration of high-Mn steels shows a tendency to start at the nose temperature TN at which precipitation is most severe. Using this relationship, we developed a model to predict the hot ductility degradation temperature of high-Mn steels. TN was calculated using J-matpro software (version 12) for 1500 compositions of high-Mn steels containing the precipitating elements V, Mo, Nb, and Ti, and by applying this to a deep neural network (DNN), then using the result to develop a model that can predict TN for various compositions of high-Mn steel. The model was tested by comparing its predicted RA degradation temperature with RAs extracted from reference data for five high-Mn steels. In all five steels, the temperature at which the RA decreases coincided with the value predicted by the DNN model. Use of this model can eliminate the cost and time required for hot ductility testing to measure RA.Keywords
This publication has 49 references indexed in Scilit:
- AlN Precipitation During Isothermal Annealing of Ultra Low Carbon SteelSteel Research International, 2011
- Influencia del Cu sobre la ductilidad en caliente de aceros C-Mn-Al y microaleados Ti-NbRevista de Metalurgia, 2005
- Hot ductility behavior of vanadium containing steelsMaterials Science and Engineering: A, 2002
- The Effect of Thermal History on the Hot Ductility of Microalloyed Steels.ISIJ International, 1999
- Influence of Ar3 and Ae3 temperatures on hot ductility of steelsMaterials Science and Technology, 1998
- In situ Solidified Hot Tensile Test and Hot Ductility of Some Plain Carbon Steels and Microalloyed Steels.ISIJ International, 1994
- Hot Ductility of High Purity Steels Containing Niobium.ISIJ International, 1992
- Influence of micro-alloying additions on the hot ductility of steels heated directly to the test temperature.Transactions of the Iron and Steel Institute of Japan, 1987
- Critical hot plasticity and transverse cracking in continuous slab casting with particular reference to composition.Transactions of the Iron and Steel Institute of Japan, 1985
- Hot ductility in Nb-bearing high-strength low-alloy steels.Transactions of the Iron and Steel Institute of Japan, 1982