Smart Energy‐Absorbing Aerogel‐Based Honeycombs with Selectively Nanoconfined Shear‐Stiffening Gel
Authors:
- 2 February 2023
- journal article
- research article
- Published by Wiley in Small Methods
- Vol. 7 (4) , e2300002
Abstract
Aerogels, shaped as fibers, films, as well as monoliths, have demonstrated a plethora of applications in both academia and industry due to charming properties including ultralow density, large specific surface area, high porosity, etc., however studies on more complicated aerogel forms (e.g., honeycombs) with more powerful applications have not been fully explored. Herein, the Kevlar aerogel honeycomb is firstly constructed through a dry ice‐assisted 3D printing method, where the Kevlar nanofiber ink is printed directly in dry ice freezing atmosphere, followed by supercritical fluid drying. The subsequent 3D Kevlar/shear‐stiffening gel (SSG) honeycomb (3D‐KSH) can be obtained by selective nanoconfining of SSG into nanopores of the aerogel skeleton wall (with the loading amount of 93 wt%) rather than into open honeycomb channels, solving the leakage, creep deformation, and shape design infeasibility of the SSG. Combining the advantages of Kevlar, honeycomb and SSG, the fabricated 3D‐KSH shows obvious smart responsive behavior to external stimulus. Additionally, the 3D‐KSH has high strain rate sensitivity (sensitivity factor of 4.16 × 10−4) and excellent impact protection performance (energy absorption value up to 176 J g−1 at the strain rate of 6300 s−1), which will significantly broaden application prospect in some intelligent protection fields.Keywords
Funding Information
- National Natural Science Foundation of China (52003290, 52173052)
- Natural Science Foundation of Jiangsu Province (BK20211099)
This publication has 62 references indexed in Scilit:
- Dynamic compressive mechanical response of a soft polymer materialMaterials & Design (1980-2015), 2015
- From hard to rubber-like: mechanical properties of resorcinol–formaldehyde aerogelsJournal of Materials Science, 2015
- Strong and Stiff Aramid Nanofiber/Carbon Nanotube NanocompositesACS Nano, 2015
- Polyborosiloxanes (PBSs), Synthetic Kinetics, and CharacterizationMacromolecules, 2014
- Strain rate-induced phase transitions in an impact-hardening polymer compositeApplied Physics Letters, 2014
- Flexibilisation of resorcinol–formaldehyde aerogelsJournal of Materials Chemistry A, 2013
- Strong, Conductive, Lightweight, Neat Graphene Aerogel Fibers with Aligned PoresACS Nano, 2012
- Honeycomb Structures of Bulk Metallic GlassesAdvanced Functional Materials, 2012
- Dispersions of Aramid Nanofibers: A New Nanoscale Building BlockACS Nano, 2011
- Highly Luminescent Quantum-Dot MonolithsJournal of the American Chemical Society, 2007