Numerical Modeling of Gas Leakage Through Damaged Composite Laminates
- 1 August 2008
- journal article
- research article
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 42 (16) , 1619-1638
Abstract
A computational fluid dynamics (CFD) model was developed to predict leakage through a damaged laminate. Crack opening displacements (COD) from a 3D finite element model were fit using a polynomial function. This curve fit was then used in defining the openings in the CFD model. Delamination length at crack intersections was estimated based on experimental data for specimens subjected to thermal loads only. Leakage under combined thermal and biaxial mechanical loadings was predicted with the estimated delamination length. Considering the sensitivity of the predictions to many variables, the calculated leakage under combined thermal and biaxial mechanical loadings was estimated with reasonable accuracy.Keywords
This publication has 13 references indexed in Scilit:
- Prediction of Cryogen Leak Rate through Damaged Composite LaminatesJournal of Composite Materials, 2007
- Evaluation of gas leakage through composite laminates with multilayer matrix cracks: Cracking angle effectsComposites Science and Technology, 2006
- Influence of stacking sequence on leakage characteristics through CFRP composite laminatesComposites Science and Technology, 2006
- Limiting the permeability of composites for cryogenic applicationsComposites Science and Technology, 2006
- Damage and permeability evolution in CFRP cross-ply laminatesComposite Structures, 2006
- Gas Leakage Evaluation of CFRP Cross-ply Laminates under Biaxial LoadingsJournal of Composite Materials, 2006
- Modeling of permeation and damage in graphite/epoxy laminates for cryogenic fuel storageComposites Science and Technology, 2004
- Analysis and Experiment of Gas Leakage Through Composite Laminates for Propellant TanksAIAA Journal, 2003
- Cryogenic mechanical properties of CF/polymer composites for tanks of reusable rocketsAdvanced Composite Materials, 2001
- Gas permeation of fibre reinforced plasticsCryogenics, 1998