Propulsion and photovoltaic charging system parameter computation for an all-electric boat
- 28 March 2023
- journal article
- research article
- Published by Taylor & Francis in Ships and Offshore Structures
- Vol. 19 (5) , 580-593
Abstract
The study aims to evaluate system combinations including batteries and electric motors for the all-electric training ship and to develop a shore facility with photovoltaic solar panels for battery charging. To achieve the objectives, the ship’s power requirements were calculated using Savitsky and Wyman methods. Specifications of the propulsion units were decided by utilizing three different driving cycles and a battery discharge simulation for these cycles was ensured. Then, time series analyses forecasted the discharge durations, and lifespans of the batteries. Finally, economic performance comparison and the ranking of the configurations were provided. Results indicate that nominal battery capacities are detected as 21.39, 39.22, and 7.51 kWh, having 4.86, 9.13, and 11.53-hours’ usage range, and payback periods of the configurations are 8.19, 6.88, and 8.05 years for each driving cycle. The configuration designed regarding the third driving cycle is the most feasible according to the multi-criteria decision-making analysis.Keywords
This publication has 40 references indexed in Scilit:
- Modelling lithium-ion battery hybrid ship crane operationApplied Energy, 2015
- Crossvalidation2015
- Root mean square error (RMSE) or mean absolute error (MAE)? – Arguments against avoiding RMSE in the literatureGeoscientific Model Development, 2014
- Lithium iron phosphate based battery – Assessment of the aging parameters and development of cycle life modelApplied Energy, 2014
- Hydrodynamic analysis techniques for high-speed planing hullsApplied Ocean Research, 2013
- Determination of an economical shipping route considering the effects of sea state for lower fuel consumptionInternational Journal of Naval Architecture and Ocean Engineering, 2013
- A comprehensive VIKOR method for material selectionMaterials & Design (1980-2015), 2011
- Determining the hydrodynamic forces on a planing hull in steady motionJournal of Marine Science and Application, 2008
- Compromise solution by MCDM methods: A comparative analysis of VIKOR and TOPSISEuropean Journal of Operational Research, 2004
- A Mathematical Theory of CommunicationBell System Technical Journal, 1948