Electromechanical characterization of date fruit membrane: A sustainable material for bio-piezoelectric energy harvesting
- 1 May 2025
- journal article
- Published by AIP Publishing in Journal of Renewable and Sustainable Energy
- Vol. 17 (3)
Abstract
The rising demand for sustainable energy and wearable technologies has prompted researchers to explore new alternatives for energy harvesting. Nature-inspired piezoelectric materials have gained attention, with significant work demonstrating how everyday vibrations or biomechanical forces can be converted into electrical charges. In this study, we report a cost-effective, bio-piezoelectric energy harvester date fruit membrane (DFM)–bio piezo energy harvester based on the endocarp (membrane) of date fruit (Phoenix dactylifera), referred to as DFM. This readily available food waste requires no chemical treatment and is easily extracted. We used scanning electron microscopy, energy-dispersive x-ray spectroscopy, and Fourier transform infrared spectroscopy to examine DFM and evaluated its piezoelectric performance by impact testing. The device's performance was assessed via torsional testing, cam-based vibration testing, capacitor charging with air blowing and hand tapping, and motion tests on the wrist and elbow. We also investigated the effects of connecting two devices in series and parallel under hand-tapping and foot-tapping stimuli, measuring power and current with multiple load resistances. Morphological analysis revealed carbon, oxygen, cellulose, and lignin, which drive the piezoelectric effect, and a robust fibril network indicating excellent mechanical strength. Multilayered DFM samples exhibited d33 values of 1.7–2.6 pC/N under known impacts. A single device generated up to 12.1 V, while two devices in series reached 15.2 V during foot tapping. Under varying resistances, we recorded a maximum current of 1.72 μA, 1.3 μW instantaneous power, and a power density of 2.05 μW/cm2 at 440 kΩ. This low-cost, easily fabricated, and robust harvester shows great potential for sustainable energy solutions.Keywords
Funding Information
- National Research Program for Universities (NRPU/17057)
This publication has 46 references indexed in Scilit:
- Natural ginkgo tree leaves as piezo-energy harvestersJournal of Materials Chemistry C, 2022
- Chicken feather fiber-based bio-piezoelectric energy harvester: an efficient green energy source for flexible electronicsSustainable Energy & Fuels, 2021
- A fully sustainable, self-poled, bio-waste based piezoelectric nanogenerator: electricity generation from pomelo fruit membraneScientific Reports, 2020
- Piezoelectric Nanocellulose Thin Film with Large-Scale Vertical Crystal AlignmentACS Applied Materials & Interfaces, 2020
- Fish Gelatin Based Triboelectric Nanogenerator for Harvesting Biomechanical Energy and Self-Powered Sensing of Human Physiological SignalsACS Applied Materials & Interfaces, 2020
- Review on Electromechanical Coupling Properties of BiomaterialsACS Applied Bio Materials, 2018
- Biowaste crab shell-extracted chitin nanofiber-based superior piezoelectric nanogeneratorJournal of Materials Chemistry A, 2018
- Date fruit ( Phoenix dactylifera L.): An underutilized food seeking industrial valorizationNFS Journal, 2017
- Cellulose Nanofibril Film as a Piezoelectric Sensor MaterialACS Applied Materials & Interfaces, 2016
- Genome sequence of the date palm Phoenix dactylifera LNature Communications, 2013