The partition of unity finite element method for elastic wave propagation in Reissner–Mindlin plates
Authors:
- 20 November 2006
- journal article
- research article
- Published by Wiley in International Journal for Numerical Methods in Engineering
- Vol. 70 (12) , 1451-1479
Abstract
This paper reports a numerical method for modelling the elastic wave propagation in plates. The method is based on the partition of unity approach, in which the approximate spectral properties of the infinite dimensional system are embedded within the space of a conventional finite element method through a consistent technique of waveform enrichment. The technique is general, such that it can be applied to the Lagrangian family of finite elements with specific waveform enrichment schemes, depending on the dominant modes of wave propagation in the physical system. A four‐noded element for the Reissner–Mindlin plate is derived in this paper, which is free of shear locking. Such a locking‐free property is achieved by removing the transverse displacement degrees of freedom from the element nodal variables and by recovering the same through a line integral and a weak constraint in the frequency domain. As a result, the frequency‐dependent stiffness matrix and the mass matrix are obtained, which capture the higher frequency response with even coarse meshes, accurately. The steps involved in the numerical implementation of such element are discussed in details. Numerical studies on the performance of the proposed element are reported by considering a number of cases, which show very good accuracy and low computational cost. Copyright © 2006 John Wiley & Sons, Ltd.Keywords
This publication has 17 references indexed in Scilit:
- The partition of unity finite element method for short wave acoustic propagation on non-uniform potential flowsInternational Journal for Numerical Methods in Engineering, 2005
- A spectral finite element model for analysis of axial–flexural–shear coupled wave propagation in laminated composite beamsComposite Structures, 2003
- Modelling of short wave diffraction problems using approximating systems of plane wavesInternational Journal for Numerical Methods in Engineering, 2002
- A 3D brick element based on Hu–Washizu variational principle for mesh distortionInternational Journal for Numerical Methods in Engineering, 2002
- Dynamic Response and Wave Propagation in Plane Trusses and FramesAIAA Journal, 1999
- EXACT DYNAMIC STIFFNESS MATRIX FOR COMPOSITE TIMOSHENKO BEAMS WITH APPLICATIONSJournal of Sound and Vibration, 1996
- Application of Triangular Space-Time Finite Elements to Problems of Wave PropagationJournal of Sound and Vibration, 1994
- A Strip Element Method for Stress Analysis of Anisotropic Linearly Elastic SolidsJournal of Applied Mechanics, 1994
- Plate bending elements with discrete constraints: New triangular elementsComputers & Structures, 1990
- On the determination of phase and group velocities of dispersive waves in solidsJournal of Applied Physics, 1978