Structure and thermal properties of polyether polyurethaneurea elastomers
Authors:
- 15 November 1993
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 50 (7) , 1269-1280
Abstract
Three series of polyether polyurethaneurea (PEUU) elastomers based on poly(tetramethylene glycol) (PTMG, MW = 1000 or 2000), 4,4′‐diphenylmethane diisocyanate (MDI), and three kinds of diamine chain extenders, i.e., 4,4′‐diaminodiphenylmethane (DAM), m‐phenylenediamine (MPD), and p‐phenylenediamine (PPD) were synthesized in dimethylformamide or DMF–LiCl solvent by the prepolymer method. The degree of phase separation was higher in the samples with PTMG‐2000 than in those with PTMG‐1000. Three‐dimensional hydrogen bonding between hard segments led to strong hard‐domain cohesion, but solubilized soft segment and the remaining LiCl within hard domains interfered with microstructural ordering of hard segments. According to the TG/DTA analyses, as‐cast PEUU elastomers showed two‐stage degradation behavior at a heating rate of 20°C/min in a nitrogen atmosphere. Initial degradation temperature was closely related with both hard‐segment content and microstructural ordering, i.e., most of the hard segments were degraded in the first stage and samples with less ordered hard segments degraded at a lower temperatures. © 1993 John Wiley & Sons, Inc.Keywords
This publication has 21 references indexed in Scilit:
- The effects of morphological transitions on hydrogen bonding in polyurethanes: Preliminary results of simultaneous DSC–FTIR experimentsJournal of Polymer Science Part B: Polymer Physics, 1986
- A new criterion of phase separation: The effect of diamine chain extenders on the properties of polyurethaneureasJournal of Applied Polymer Science, 1982
- SAXS studies of segmented polyether poly(urethaneurea) elastomersMacromolecules, 1981
- Thermal degradation of a series of polyester polyurethanesJournal of Polymer Science: Polymer Chemistry Edition, 1980
- Strength of elastorners—a perspectivePolymer Engineering & Science, 1977
- Improvement of the impact strength of a blend of poly(vinyl chloride) with copolyester thermoplastic elastomer by heat treatmentJournal of Applied Polymer Science, 1976
- Hard Block Length Distribution in Segmented Block CopolymersMacromolecules, 1976
- Superstructure in segmented polyether–urethanesJournal of Polymer Science: Polymer Physics Edition, 1975
- Infrared studies on segmented polyurethane-urea elastomersJournal of Macromolecular Science, Part B, 1974
- Sequence Length Distribution in Segmented Block CopolymersMacromolecules, 1974