Strata Caving and Gob Evolution Characteristic in Longwall Mining
Open Access
- 20 March 2022
- journal article
- research article
- Published by Wiley in Shock and Vibration
- Vol. 2022, 1-11
Abstract
It is usually difficult to capture strata caving and gob evolution characteristic in longwall mining at engineering scales. This paper uses bonded block modelling (BBM) approach within a distinct element method (DEM) code to simulate strata behaviour in longwall mining, which captures the caving phenomena and bulking characteristics of roof strata successfully. Many features in longwall mining, including the caving and compaction of gob strata and the associated stress evolution, are reproduced in the model. Four zones in longwall gob are identified based on its stress characteristics: voussoir influencing zone, compacted zone, compacting zone, and pilling zone. The initial bulking factor of the caved strata ranges from 1.12 to 1.25 and decreases gradually to the residual bulk factor of approximately 1.05 as the longwall face advances. The caved strata in the longwall gob present strain hardening behaviour and the load carrying capacity increases exponentially as a function of strain. Moreover, the range of the interaction between the caving strata and the overburden in gob was discussed, which provides a reference when using a continuum method to simulate longwall mining.Keywords
Funding Information
- Fundamental Research Funds for the Central Universities (2021YQNY10, 2021YJSNY03)
This publication has 22 references indexed in Scilit:
- A discontinuum modelling approach for investigation of Longwall Top Coal Caving mechanismsInternational Journal of Rock Mechanics and Mining Sciences, 2018
- Effect of Particle Size on the Energy Evolution of Crushed Waste Rock in Coal MinesRock Mechanics and Rock Engineering, 2016
- An innovative approach for gob-side entry retaining in highly gassy fully-mechanized longwall top-coal cavingInternational Journal of Rock Mechanics and Mining Sciences, 2015
- Simulation of roof shear failure in coal mine roadways using an innovative UDEC Trigon approachComputers and Geotechnics, 2014
- Evaluation of coal longwall caving characteristics using an innovative UDEC Trigon approachComputers and Geotechnics, 2014
- Structural characteristics of key strata and strata behaviour of a fully mechanized longwall face with 7.0m height chocksInternational Journal of Rock Mechanics and Mining Sciences, 2013
- Upshot of strata movement during underground mining of a thick coal seam below hilly terrainInternational Journal of Rock Mechanics and Mining Sciences, 2008
- Modelling of strata movement with a special reference to caving mechanism in thick seam coal miningInternational Journal of Coal Geology, 2006
- An estimation method for cover pressure re-establishment distance and pressure distribution in the goaf of longwall coal minesInternational Journal of Rock Mechanics and Mining Sciences, 2004
- Characterization of coal-mine refuse as backfilling materialGeotechnical and Geological Engineering, 1996