Study on fabric/polyurethane high strength porous composite foam: Pb2+ adsorption properties and mechanical properties
- 7 October 2021
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 42 (12) , 6322-6331
Abstract
In this paper, by compounding different size of polyester nonwovens and nylon nonwovens with melamine‐bentonite composite PU foam, a high‐impact polyurethane composite material with excellent mechanical strength and good adsorbability was prepared. The cellular structure and mechanical property of PU foam was influenced by the composition of two different fabrics. With the adding of fabric, the cell size is decreased and a boundary‐like structure is formed at the fabric‐foam interface. The closer to the interface, the smaller and more uneven the foam cell is. The mechanical property of the composites was improved by adding fabric. The lower density of the composite surface, the better compression resistance the material is. The compression strength of 200 g/cm2 nylon nonwovens composite PU foam was 44.01 kPa, which was 213.83% of Neat PU. The optimum adsorption conditions, such as pH, adsorption time and initial concentration were investigated. The results showed that the Pb2+ could be removed effectively by fabric composite PU foam. Langmuir model, Freundlich model and adsorption kinetics model were used to evaluate the adsorption properties of fabric‐PU foam.Keywords
Funding Information
- National Natural Science Foundation of China (51503145, 11702187)
- Natural Science Foundation of Fujian Province (2018J01505)
- Natural Science Foundation of Tianjin Municipality (17JCYBJC41200)
This publication has 21 references indexed in Scilit:
- Elastomeric Nanocomposite Foams for the Removal of Heavy Metal Ions from WaterACS Applied Materials & Interfaces, 2015
- Adsorption studies of Pb(II) and Cu(II) ions on mesoporous carbon nitride functionalized with melamine-based dendrimer amineInternational Journal of Environmental Science and Technology, 2015
- Adsorption of Divalent Heavy Metal Ions from Aqueous Solution by Citric Acid Modified Pine SawdustSeparation Science and Technology, 2014
- Removal of heavy metal ions from aqueous medium using Kuluncak (Malatya) vermiculites and effect of precipitation on removalApplied Clay Science, 2014
- A mesoporous poly-melamine-formaldehyde polymer as a solid sorbent for toxic metal removalEnergy & Environmental Science, 2013
- Synthesis of L-Cysteine grafted nanoporous carbon (CMK-3) and its use as a new cadmium sorbentChemical Engineering Journal, 2013
- Amine-functionalised SBA-15 of tailored pore size for heavy metal adsorptionJournal of Colloid and Interface Science, 2012
- Removal of heavy metal ions from wastewaters: A reviewJournal of Environmental Management, 2011
- Synthesis and processing of PMMA carbon nanotube nanocomposite foamsPolymer, 2010
- Activated carbons and low cost adsorbents for remediation of tri- and hexavalent chromium from waterJournal of Hazardous Materials, 2006