Effect of plastic fine particles on shear strength at the critical state of sand–clay mixture
Authors:
- 1 January 2025
- journal article
- Published by Canadian Science Publishing in Canadian Geotechnical Journal
- Vol. 62, 1-21
Abstract
A large number of engineering cases have shown that there is significant presence of the sand–clay mixtures during the engineering geological accidents. Static liquefaction or loss of bearing capacity is frequently observed due to the rise in pore water pressure from large deformation in such engineering geology. This study investigates the static behavior of sand–clay mixtures with varying fines contents and various plasticity indices of fines by means of the monotonic drained consolidation triaxial shear tests in conjunction with the binary packing model. Factors influencing the active fines content ( b) of the sand–clay mixtures are examined based on the mixtures’ critical state. This study also discusses the reasons for variations in the critical friction angle ( M) of the sand–clay mixtures using environmental scanning electron microscope tests. Results indicated that the changes of fines content and the plastic index of fines have a certain effect on the static behavior, active fines content ( b), and the friction angle ( M) of the sand–clay mixture. This study presents an equation with reliable predictive results. These findings hold considerable importance for a deeper understanding of the mechanical properties of the sand–clay mixture with and the influencing mechanisms of different plasticity index of fines.Keywords
This publication has 61 references indexed in Scilit:
- Undrained monotonic shear behavior of sand mixed with a small amount of fines contentActa Geotechnica, 2022
- Compositional Features of Fine Sediments Involved in the Montescaglioso Landslide (Southern Italy)Journal of Earth Science, 2022
- Influence of plastic fines content on the liquefaction susceptibility of sands: monotonic loadingActa Geotechnica, 2021
- Liquefaction triggering in silty sands: effects of non-plastic fines and mixture-packing conditionsActa Geotechnica, 2021
- Laboratory Investigation into the Effect of Fines Plasticity on the Mechanical Behavior of Sand/Fines MixturesTransportation Infrastructure Geotechnology, 2021
- Maximum and minimum void ratios for sand-silt mixturesEngineering Geology, 2016
- A simple critical state approach to predicting the cyclic and monotonic response of sands with different fines contents using the equivalent intergranular void ratioActa Geotechnica, 2014
- Compressional behaviour of various size/shape sand–clay mixtures with different pore fluidsEngineering Geology, 2013
- Undrained Cyclic and Monotonic Strength of Sand-Silt MixturesGeotechnical and Geological Engineering, 2011
- Intergrain contact density indices for granular mixes—I: FrameworkEarthquake Engineering and Engineering Vibration, 2007