Effect of Adding Sawdust to Cement on its Thermal Conductivity and Compressive Strength
Authors:
Open Access
- 1 February 2021
- conference paper
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 1094 (1) , 012047
Abstract
In this practical study, the thermal conductivity and compressive strength of a number of cement mortar and sawdust mixtures were measured. This study aims to analyze the possibility of using these mixtures as thermal insulators in the building parts. The materials used in the study were ordinary Portland cement available in the local Iraqi market, sand, and sawdust. Samples were prepared according to American standards. Sawdust in two different sizes (greater than 50 mm and less than 1.4 mm) was added to the cement. The study results showed that adding sawdust caused an apparent decrease in the mixture’s thermal conductivity, which means an improvement in the thermal insulation of the mixtures. The decrease in conductivity also raised with the sawdust mass fraction increase. The thermal conductivity of sawdust and cement mixtures increased when using small sawdust (less than 1.4 mm) compared to the second case (sawdust of large size above 5 mm). The mixture’s thermal conductivity decreased with the increase in the water curing period, and the decrease in conductivity increased with this period. Increasing the sawdust mass fraction resulted in a decrease in the studied mixtures’ compressive strength, and this resistance decreased more when using sawdust of smaller sizes (less than 1.4 mm). The compressibility strength of all the studied products increases with the increase in the treatment time with water due to the cement’s properties.Keywords
This publication has 10 references indexed in Scilit:
- Fire experiment on temperature distribution in an underground vertical car parkCase Studies in Thermal Engineering, 2019
- Nanofluid based grid connected PV/T systems in Malaysia: A techno-economical assessmentSustainable Energy Technologies and Assessments, 2018
- Effective use of sawdust for the production of eco-friendly and thermal-energy efficient normal weight and lightweight concretes with tailored fracture propertiesJournal of Cleaner Production, 2018
- Techno-economical assessment of grid connected PV/T using nanoparticles and water as base-fluid systems in MalaysiaInternational Journal of Sustainable Energy, 2017
- Characterization of lightweight mortars containing wood processing by-products wasteConstruction and Building Materials, 2016
- Physical and mechanical properties of wood-gypsum composites from demolition material in rehabilitation worksConstruction and Building Materials, 2016
- Thermal and mechanical performance of natural mortar reinforced with date palm fibers for use as insulating materials in buildingEnergy and Buildings, 2014
- Development of Wood-Crete building materials from sawdust and waste paperConstruction and Building Materials, 2013
- Mechanical properties of concrete produced with a composite of water treatment sludge and sawdustConstruction and Building Materials, 2011
- Effect of the addition of wood shavings on thermal conductivity of sand concretes: Experimental study and modellingConstruction and Building Materials, 2007