The Effectiveness of Different Additives on Concrete’s Freeze–Thaw Durability: A Review
Top Cited Papers
Open Access
Abstract
Enhancing concrete’s resilience against freeze–thaw (F-T) cycles is a critical challenge in civil engineering, especially in cold climates, where repeated freezing and thawing lead to structural degradation. This review explores the effectiveness of various additives, including supplementary cementitious materials (SCMs) and chemical admixtures, in improving concrete durability under F-T conditions. Factors influencing F-T resistance include the type and percentage of SCM replacement, the water–cement ratio, pore structure refinement, and air entrainment. The mechanisms by which additives enhance the durability—such as reducing the permeability, improving the microstructure, and increasing the compressive strength—are examined through an extensive review of experimental studies. The findings indicate that manufactured additives, such as silica fume, metakaolin, nano-SiO2, and graphene oxide, significantly enhance the F-T durability by densifying the concrete matrix and mitigating internal damage. In contrast, natural additives, including rice husk ash and zeolite, show potential but require optimization to match the performance of industrial SCMs. Additionally, the preparation and treatment methods of these materials play a crucial role in their effectiveness. This review provides insights into optimizing concrete formulations to enhance the longevity and sustainability, offering practical recommendations for the use of SCMs in cold climates.Keywords
This publication has 67 references indexed in Scilit:
- Supplementary cementitious materials: New sources, characterization, and performance insightsCement and Concrete Research, 2019
- Full-Scale Membrane Distillation Systems and Performance Improvement Through Modeling2019
- Eco-efficient cements: Potential economically viable solutions for a low-CO2 cement-based materials industryCement and Concrete Research, 2018
- Supplementary Cement Replacement Materials for Sustainable Concrete2018
- Empirical models and design codes in prediction of modulus of elasticity of concreteFrontiers of Structural and Civil Engineering, 2018
- Strength development characteristics of concrete produced with blended cement using ground granulated blast furnace slag (GGBS) under various curing conditionsSādhanā, 2017
- Constitutive Models2017
- Freeze-thaw resistance of concrete using acid-leached rice husk ashKSCE Journal of Civil Engineering, 2014
- New cements for the 21st century: The pursuit of an alternative to Portland cementCement and Concrete Research, 2011
- Engineering property and structural design relationships for new and developing concretesMaterials and Structures, 2005