Review of the actuators of active knee prostheses and their target design outputs for activities of daily living
Authors:
- 1 July 2017
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 2017, 1246-1253
Abstract
Active prosthetic knees have the capability to provide net positive work, which is required in daily activities like stair and ramp negotiation or sit-to-stand transfers. Adding this capability might help to increase user mobility, safety, and independence. This article summarizes the biomechanical knee requirements for different activities of daily living and critically compares them with the actuator characteristics of state-of-the-art active prosthetic knee joints. As a result of a systematic literature research 22 active prosthetic knee joints were identified. Most systems use a stiff actuator in combination with a ball screw and are capable of supporting the majority of daily tasks for the average US citizen (82.5 kg) at self-selected movement speed. Physiological requirements exceed most system specifications if increased user mass, walking speed, or inclinations are assumed. To cope with the requirements, springs and dampers are used to assist the motor. The comparison of the prostheses characteristics with anthropometric data shows that most of the devices are in the physiological range for the system height and even when being tethered it is critical to achieve a physiological mass. Also while just one active knee is commercialized so far, physiological knee biomechanics show that there is a potential for active prosthetic knee solutions. Summarized biomechanical and anthropometric data can be used as a framework to develop prototypes. Further, the overview of state-of-the-art systems can provide possible solutions to deal with the task specific prosthetic knee requirements.Keywords
This publication has 50 references indexed in Scilit:
- Functional gait asymmetry of unilateral transfemoral amputeesHuman Movement Science, 2012
- Empirical Likelihood Inference for Linear EV Models with Missing Responses ProblemAdvanced Materials Research, 2012
- Incidence of Lower-Limb Amputation in the Diabetic and Nondiabetic General PopulationDiabetes Care, 2009
- Comparison of nonmicroprocessor knee mechanism versus C-Leg on Prosthesis Evaluation Questionnaire, stumbles, falls, walking tests, stair descent, and knee preferenceJournal of Rehabilitation Research and Development, 2008
- Estimating the Prevalence of Limb Loss in the United States: 2005 to 2050Archives of Physical Medicine and Rehabilitation, 2008
- Obstacle crossing in lower limb amputeesGait & Posture, 2007
- Design and control of an active artificial knee jointMechanism and Machine Theory, 2006
- The effects of sloped surfaces on locomotion: A kinematic and kinetic analysisJournal of Biomechanics, 2006
- EFFECT OF PROSTHETIC MASS ON SWING PHASE WORK DURING ABOVE-KNEE AMPUTEE AMBULATION1American Journal of Physical Medicine & Rehabilitation, 1997
- Overall principle of lower limb support during stance phase of gaitJournal of Biomechanics, 1980