Study on Deformation Behavior and Mechanical Properties of 42CrMo High-Strength Steel with Multi-Station Warm Upsetting
Open Access
Abstract
In order to find out the deformation behavior and mechanical properties of 42CrMo steel under warm upsetting conditions, the Gleeble-3500 thermal simulation testing machine was used to carry out a warm upsetting physical simulation experiment on 42CrMo steel. By controlling deformation temperature, strain rate, and constant temperature deformation pass, the microstructure evolution rule under different warm upsetting conditions was analyzed, and its hardness value was measured. Then, the simulation experiment is carried out based on the Deform-3D finite element platform. The results show that, with the increase in deformation temperature, 42CrMo steel has a temperature rise softening effect, which significantly reduces the peak value of rheological stress. At 650 °C, the maximum peak value of rheological stress is only 45.3% of that of cold upsetting deformation at room temperature, and the stress-strain curve tends to be gentle at the plastic deformation stage, which is the most suitable temperature for warm upsetting deformation. The maximum peak flow stress of 42CrMo steel increases with the increase in strain rate, but the number of deformation channels has little influence on the stress-strain curve. The warm, upsetting deformation can refine the internal grain structure significantly, and the grain refinement mechanism is mechanical crushing. When the temperature is slightly higher, the broken grain will recover, and the grain size will grow. During the process of warm upsetting, the strain rate has a great influence on the microhardness of the sample. The deformation pass has little influence on the hardness, and the hardness increases slightly with the increase in the deformation pass. Through the Deform-3D simulation, the correlation coefficient R and the average absolute relative error (AARE) between the simulation value and the experimental value were calculated, and the correlation coefficient R-value was 0.9948, and the average absolute relative error (AARE) was 2.05%, indicating that the simulation can accurately reflect the relationship between displacement and applied load.Keywords
Funding Information
- Henan Provincial Science and Technology Research Project (222102230118, 23A460016)
- Key Research Projects of Higher Education Institutions in Henan Province (222102230118, 23A460016)
This publication has 23 references indexed in Scilit:
- Structural and mechanical maintenance of quality of the rolled stock for cold upsetting of metal articlesIOP Conference Series: Materials Science and Engineering, 2019
- Finer subgrain microstructure induced by multi-pass compression in α+β phase region in a near-β Ti-5Al-5Mo-5V-1Cr-1Fe alloyJournal of Alloys and Compounds, 2019
- Numerical analysis and experimental validation of conjunction gear via hot forging-upsetting finishing-radial extrusionArchives of Civil and Mechanical Engineering, 2019
- In-situ investigation on nucleation and propagation of {10-12} twins during uniaxial multi-pass compression in an extruded AZ31 Mg alloyMaterials Science and Engineering: A, 2018
- Defining rolled metal performance for cold bolt upsetting (bolt head)IOP Conference Series: Materials Science and Engineering, 2018
- Constitutive model of 42CrMo steel under a wide range of strain rates based on crystal plasticity theoryMaterials Science and Engineering: A, 2017
- Influence of rolling temperature on interface properties of the cross wedge rolling of 42CrMo/Q235 laminated shaftThe International Journal of Advanced Manufacturing Technology, 2016
- Deformation Behavior and Microstructure Evolution of As-Cast 42CrMo Alloy in Isothermal and Non-isothermal CompressionJournal of Materials Engineering and Performance, 2016
- Structure uniformity and limits of grain refinement of high purity aluminum during multi-directional forging process at room temperatureTransactions of Nonferrous Metals Society of China, 2014
- Effect of temperature and strain rate on the compressive deformation behavior of 42CrMo steelJournal of Materials Processing Technology, 2008