Fabrication of bioactive hydroxyapatite/bis-GMA based composite via three dimensional printing
Authors:
- 16 January 2008
- journal article
- Published by Springer Nature in Journal of Materials Science: Materials in Medicine
- Vol. 19 (7) , 2637-2645
Abstract
Hydroxyapatite/bis-GMA composites were processed by new technique which comprised three dimensional printing (3DP) of hydroxyapatite and then impregnation by bis-GMA based resin. Two types of composites which used either as-fabricated green 3DP samples or 1,300°C sintered 3DP samples were studied. It was found that both 3DP composites have higher flexural modulus, strength and strain at break than the initial 3DP hydroxyapatite sample. Composites produced from sintered sample has higher hydroxyapatite content, higher density and greater modulus, but lower strength and strain at break than composite produced from green 3DP sample. In vitro toxicity shows that 3DP hydroxyapatite/bis-GMA based composites are non-toxic. Osteoblast cells were observed to attach and attain normal morphology on the surface of composites.Keywords
This publication has 28 references indexed in Scilit:
- Development of high-viscosity, two-paste bioactive bone cementsBiomaterials, 2005
- Cemented fixation with PMMA or Bis-GMA resin hydroxyapatite cement: effect of implant surface roughnessBiomaterials, 2004
- A rapid design and manufacturing system for product development applicationsRapid Prototyping Journal, 2004
- Mechanical properties of porous titanium compacts prepared by powder sinteringScripta Materialia, 2003
- Use of stereolithography to manufacture critical‐sized 3D biodegradable scaffolds for bone ingrowthJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2002
- Osteoblast behaviour on HA/PE composite surfaces with different HA volumesBiomaterials, 2002
- Preliminary study of rapid prototype medical modelsRapid Prototyping Journal, 2001
- Surface macro‐texture design for rapid prototypingRapid Prototyping Journal, 2000
- A comparison of rapid prototyping technologiesInternational Journal of Machine Tools and Manufacture, 1998
- Stress‐strain behavior of styrene‐acrylonitrile/glass bead composites in the glassy regionPolymer Engineering & Science, 1971