Superhydrophobic Candle Soot as a Low Fouling Stable Coating on Water Treatment Membrane Feed Spacers
Open Access
- 13 April 2021
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Bio Materials
- Vol. 4 (5) , 4191-4200
Abstract
Membrane separation processes including reverse osmosis are now considered essential techniques for water and wastewater treatment, especially in water-scarce areas where desalination and water reuse can augment the water supply. However, biofouling remains a significant challenge for these processes and in general for marine biological fouling, which results in increased energy consumption and high operational costs. Especially in flat sheet membrane modules, intense biofilm growth occurs on the feed spacer at points of contact to the membrane surface. Here, we developed an ultrastable superhydrophobic antibiofouling feed spacer that resists biofilm growth. A commercial polypropylene feed spacer was coated with poly(dimethylsiloxane) (PDMS), and then, candle soot nanoparticles (CSNPs) were embedded into the ultrathin layer of PDMS, which resulted in a superhydrophobic nanostructured surface with a contact angle >150°. The CSNP-coated spacer was examined for inhibition of biofilm growth by a cross-flow membrane channel using Pseudomonas aeruginosa (PA01), and the coating was examined for effectiveness in marine fouling by testing the adhesion of marine bacterium Cobetia marina and diatom Navicula perminuta in a dynamic accumulation assay. In all cases, the CSNP coatings showed almost complete elimination of biofilm growth under the conditions tested. Confocal laser scanning microscopy and scanning electron microscopy indicated a 99% reduction in biofilm growth on the modified spacers compared to the uncoated controls. This effect was attributed to the superhydrophobic nanostructured surface, where trapped gasses formed a plastron on the coating. This plastron was observed to be extremely stable over time and could even be replenished at elevated temperatures. Development of similar antibiofouling coatings on feed spacers or other marine applications might lead to improvements in many industrial processes including membrane filtration where increased membrane life span and reduced energy consumption are key to implementation.Keywords
Funding Information
- Bundesministerium f?r Bildung und Forschung (02WIL1487)
- Office of Naval Research Global (461 710 0004)
- Israel Ministry of Science and Technology (02WIL1487)
This publication has 44 references indexed in Scilit:
- Predicting the impact of feed spacer modification on biofouling by hydraulic characterization and biofouling studies in membrane fouling simulatorsWater Research, 2017
- The effect of different surface conditioning layers on bacterial adhesion on reverse osmosis membranesDesalination, 2016
- Experimental characterization and numerical simulation of the anti-biofuling activity of nanosilver-modified feed spacers in membrane filtrationJournal of Membrane Science, 2015
- Impact of Feed Spacer Filament Spacing on Mass Transport and Fouling Propensities of RO Membrane SurfacesChemical Engineering Communications, 2014
- Impact of ZnO embedded feed spacer on biofilm development in membrane systemsWater Research, 2013
- Antibacterial efficiency of composite nano-ZnO in biofilm development in flow-through systemsDesalination and Water Treatment, 2013
- The Future of Seawater Desalination: Energy, Technology, and the EnvironmentScience, 2011
- Biofouling in spiral wound membrane systems: Three-dimensional CFD model based evaluation of experimental dataJournal of Membrane Science, 2010
- Application of nanosilver surface modification to RO membrane and spacer for mitigating biofouling in seawater desalinationWater Research, 2009
- Biofouling of spiral-wound nanofiltration and reverse osmosis membranes: A feed spacer problemWater Research, 2009